Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 1996-08-01 → 1996-08-31 |
| MR | Monitoring | Resolved | 1996-08-01 → 1996-08-31 |
| MR | Monitoring | Resolved | 1996-08-01 → 1996-08-31 |
| MR | Monitoring | Resolved | 1996-08-01 → 1996-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 113.1 µg/L 8.7% of the EPA limit 1300 µg/L
worst single sample: 137 µg/L | 30/30 | SYR4 | 2012–2018 |
| Lead | 5.83 µg/L 39% of the EPA limit 15 µg/L
worst single sample: 6.6 µg/L | 15/30 | SYR4 | 2012–2018 |
| Lead | 0.0018 mg/L 12% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2024 |
| Chloroform | 9.15 µg/L No EPA limit set
worst single sample: 9.69 µg/L | 7/7 | SYR4 | 2013–2019 |
| TTHM | 13.475 µg/L 17% of the EPA limit 80 µg/L
worst single sample: 14 µg/L | 6/7 | SYR4 | 2013–2019 |
| Bromodichloromethane | 2.884 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 5/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 1.226 µg/L No EPA limit set
worst single sample: 1.33 µg/L | 5/7 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 2.964 µg/L No EPA limit set
worst single sample: 3.12 µg/L | 4/7 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.054 µg/L No EPA limit set
worst single sample: 1.07 µg/L | 3/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 3.339 µg/L No EPA limit set
worst single sample: 3.47 µg/L | 3/7 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 6.7125 µg/L 11% of the EPA limit 60 µg/L
worst single sample: 6.75 µg/L | 2/7 | SYR4 | 2013–2019 |
| Barium | 57.2 µg/L 2.9% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2012 |
| Bromoform | 0.6300 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.3 pCi/L 26% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2012 |
45 contaminants tested, none detected
Utility contact
Frequently asked questions about Freeport Water District
Is Freeport Water District tap water safe to drink?
EPA monitoring detected 15 contaminants in Freeport Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Freeport Water District's water?
EPA monitoring detected Copper, Lead, Lead, Chloroform, TTHM, and others. The full list with the level and data source for each is above.
How many people does Freeport Water District serve?
Freeport Water District reports serving 775 people in Iowa, per its EPA record.
Has Freeport Water District had any water quality violations?
The EPA has 4 violations on file for Freeport Water District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.