Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 867.5 µg/L 22% of the EPA limit 4000 µg/L
worst single sample: 1100 µg/L | 94/95 | SYR4 | 2012–2019 |
| Copper | 884.25 µg/L 68% of the EPA limit 1300 µg/L
worst single sample: 943 µg/L | 30/30 | SYR4 | 2013–2019 |
| Nitrate | 4000 µg/L 40% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0048 mg/L 32% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Lead | 93.655 µg/L 624% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 197 µg/L | 12/30 | SYR4 | 2013–2019 |
| Bromodichloromethane | 14.475 µg/L No EPA limit set
worst single sample: 17.4 µg/L | 10/10 | SYR4 | 2012–2019 |
| Chloroform | 37.085 µg/L No EPA limit set
worst single sample: 53.6 µg/L | 10/10 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.277 µg/L No EPA limit set
worst single sample: 2.34 µg/L | 10/10 | SYR4 | 2012–2019 |
| Dibromochloromethane | 7.987 µg/L No EPA limit set
worst single sample: 8.32 µg/L | 10/10 | SYR4 | 2012–2019 |
| TTHM | 59.995 µg/L 75% of the EPA limit 80 µg/L
worst single sample: 79.3 µg/L | 10/10 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.96 µg/L No EPA limit set
worst single sample: 2.05 µg/L | 10/10 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.542 µg/L No EPA limit set
worst single sample: 5.27 µg/L | 9/10 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 18.58 µg/L 31% of the EPA limit 60 µg/L
worst single sample: 22.1 µg/L | 9/10 | SYR4 | 2012–2019 |
| Bromoform | 2.7895 µg/L No EPA limit set
worst single sample: 3.22 µg/L | 8/10 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 13.7975 µg/L No EPA limit set
worst single sample: 16.2 µg/L | 6/10 | SYR4 | 2012–2019 |
| Barium | 108 µg/L 5.4% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2013 |
| Selenium | 2.9 µg/L 5.8% of the EPA limit 50 µg/L | 1/1 | SYR4 | 2013 |
43 contaminants tested, none detected
Utility contact
Frequently asked questions about Tama Water Supply
Is Tama Water Supply tap water safe to drink?
EPA monitoring detected 17 contaminants in Tama Water Supply's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Tama Water Supply's water?
EPA monitoring detected Fluoride, Copper, Nitrate, Lead, Lead, and others. The full list with the level and data source for each is above.
How many people does Tama Water Supply serve?
Tama Water Supply reports serving 3,130 people in Iowa, per its EPA record.
Has Tama Water Supply had any water quality violations?
The EPA has 8 violations on file for Tama Water Supply, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.