Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-01-01 → 2009-03-31 |
| MCL | Health-based | Resolved | 2009-01-01 → 2009-03-31 |
| MCL | Health-based | Resolved | 2009-01-01 → 2009-03-31 |
| MCL | Health-based | Resolved | 2009-01-01 → 2009-03-31 |
| MCL | Health-based | Resolved | 2008-10-01 → 2008-12-31 |
| MCL | Health-based | Resolved | 2008-10-01 → 2008-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 63.02 µg/L 4.8% of the EPA limit 1300 µg/L
worst single sample: 128 µg/L | 20/20 | SYR4 | 2014–2017 |
| Chloroform | 42.55 µg/L No EPA limit set
worst single sample: 48.4 µg/L | 16/17 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 17.6 µg/L No EPA limit set
worst single sample: 19.7 µg/L | 15/17 | SYR4 | 2012–2019 |
| Bromodichloromethane | 16.95 µg/L No EPA limit set
worst single sample: 17.6 µg/L | 14/17 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.899 µg/L No EPA limit set
worst single sample: 3.77 µg/L | 14/17 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 35.435 µg/L 59% of the EPA limit 60 µg/L
worst single sample: 35.5 µg/L | 14/17 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 8.092 µg/L No EPA limit set
worst single sample: 8.3 µg/L | 14/17 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2023 |
| Dibromochloromethane | 7.7895 µg/L No EPA limit set
worst single sample: 7.83 µg/L | 10/17 | SYR4 | 2012–2019 |
| TTHM | 65.425 µg/L 82% of the EPA limit 80 µg/L
worst single sample: 67.9 µg/L | 10/17 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 15.8 µg/L No EPA limit set
worst single sample: 16 µg/L | 9/17 | SYR4 | 2012–2019 |
| Lead | 2.925 µg/L 19% of the EPA limit 15 µg/L
worst single sample: 3.1 µg/L | 8/20 | SYR4 | 2014–2017 |
| Bromoform | 1.4865 µg/L No EPA limit set
worst single sample: 1.49 µg/L | 2/17 | SYR4 | 2012–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Park View Village
Is Park View Village tap water safe to drink?
EPA monitoring detected 13 contaminants in Park View Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Park View Village's water?
EPA monitoring detected Copper, Chloroform, Dichloroacetic Acid, Bromodichloromethane, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Park View Village serve?
Park View Village reports serving 1,800 people in Iowa, per its EPA record.
Has Park View Village had any water quality violations?
The EPA has 24 violations on file for Park View Village, of which 16 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.