Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1990-11-01 → 1990-11-30 |
| MCL | Health-based | Resolved | 1990-11-01 → 1990-11-30 |
| MCL | Health-based | Resolved | 1990-11-01 → 1990-11-30 |
| MCL | Health-based | Resolved | 1990-11-01 → 1990-11-30 |
| MCL | Health-based | Resolved | 1990-11-01 → 1990-11-30 |
| MCL | Health-based | Resolved | 1990-10-01 → 1990-10-31 |
| MCL | Health-based | Resolved | 1990-10-01 → 1990-10-31 |
| MCL | Health-based | Resolved | 1990-10-01 → 1990-10-31 |
| MCL | Health-based | Resolved | 1990-10-01 → 1990-10-31 |
| MCL | Health-based | Resolved | 1990-10-01 → 1990-10-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 231.2 µg/L 18% of the EPA limit 1300 µg/L
worst single sample: 255 µg/L | 38/40 | SYR4 | 2012–2017 |
| Lead | 0.0080 mg/L 53% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2023 |
| Lead | 3.0295 µg/L 20% of the EPA limit 15 µg/L
worst single sample: 3.81 µg/L | 8/40 | SYR4 | 2012–2017 |
| Bromodichloromethane | 2.54 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 3/3 | SYR4 | 2013–2019 |
| Chloroform | 3.93 µg/L No EPA limit set
worst single sample: 4 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.69 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 2.8 µg/L No EPA limit set
worst single sample: 3 µg/L | 3/3 | SYR4 | 2013–2019 |
| TTHM | 8.04 µg/L 10% of the EPA limit 80 µg/L
worst single sample: 8.2 µg/L | 3/3 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
5 contaminants tested, none detected
Utility contact
Frequently asked questions about Brunsville Municipal Water Supply
Is Brunsville Municipal Water Supply tap water safe to drink?
EPA monitoring detected 9 contaminants in Brunsville Municipal Water Supply's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Brunsville Municipal Water Supply's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Brunsville Municipal Water Supply serve?
Brunsville Municipal Water Supply reports serving 129 people in Iowa, per its EPA record.
Has Brunsville Municipal Water Supply had any water quality violations?
The EPA has 20 violations on file for Brunsville Municipal Water Supply, of which 15 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.