Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Resolved | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Resolved | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Resolved | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Resolved | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Resolved | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Resolved | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Resolved | 1992-09-01 → 1992-09-30 |
| MCL | Health-based | Resolved | 1990-08-01 → 1990-08-31 |
| MCL | Health-based | Resolved | 1990-08-01 → 1990-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 405 µg/L 31% of the EPA limit 1300 µg/L
worst single sample: 460 µg/L | 12/15 | SYR4 | 2012–2018 |
| Lead | 0.0096 mg/L 64% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2024 |
| Lead | 7.65 µg/L 51% of the EPA limit 15 µg/L
worst single sample: 9 µg/L | 10/15 | SYR4 | 2012–2018 |
| Bromodichloromethane | 4.68 µg/L No EPA limit set
worst single sample: 4.7 µg/L | 2/3 | SYR4 | 2013–2019 |
| Bromoform | 1.485 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 2/3 | SYR4 | 2013–2019 |
| Chloroform | 3 µg/L No EPA limit set | 2/3 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 2.245 pCi/L 45% of the EPA limit 5 pCi/L
worst single sample: 2.3 pCi/L | 2/2 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 2 µg/L No EPA limit set | 2/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 4.58 µg/L No EPA limit set
worst single sample: 4.6 µg/L | 2/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.95 µg/L No EPA limit set
worst single sample: 2 µg/L | 2/3 | SYR4 | 2013–2019 |
| TTHM | 13.95 µg/L 17% of the EPA limit 80 µg/L
worst single sample: 14 µg/L | 2/3 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 1 µg/L No EPA limit set | 2/3 | SYR4 | 2013–2019 |
| Fluoride | 880 µg/L 22% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2013 |
| Monochloroacetic Acid | 2 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Nitrite | 200 µg/L 20% of the EPA limit 1000 µg/L | 1/1 | SYR4 | 2013 |
| Total Haloacetic Acids (HAA5) | 6 µg/L 10% of the EPA limit 60 µg/L | 1/3 | SYR4 | 2013–2019 |
45 contaminants tested, none detected
Utility contact
Frequently asked questions about Rodman Water
Is Rodman Water tap water safe to drink?
EPA monitoring detected 16 contaminants in Rodman Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Rodman Water's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Rodman Water serve?
Rodman Water reports serving 31 people in Iowa, per its EPA record.
Has Rodman Water had any water quality violations?
The EPA has 33 violations on file for Rodman Water, of which 14 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.