Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 1988-01-01 → 1990-12-31 |
| MR | Monitoring | Resolved | 1988-01-01 → 1990-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 858 µg/L 21% of the EPA limit 4000 µg/L
worst single sample: 1020 µg/L | 83/87 | SYR4 | 2012–2019 |
| Copper | 226.7 µg/L 17% of the EPA limit 1300 µg/L
worst single sample: 240 µg/L | 20/20 | SYR4 | 2014–2017 |
| Lead | 0.0060 mg/L 40% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Lead | 8.44 µg/L 56% of the EPA limit 15 µg/L
worst single sample: 13.3 µg/L | 13/20 | SYR4 | 2014–2017 |
| Chloroform | 10.725 µg/L No EPA limit set
worst single sample: 10.8 µg/L | 6/6 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 4.154 µg/L No EPA limit set
worst single sample: 4.16 µg/L | 5/6 | SYR4 | 2013–2019 |
| TTHM | 19.66 µg/L 25% of the EPA limit 80 µg/L
worst single sample: 19.7 µg/L | 5/6 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 3.152 µg/L No EPA limit set
worst single sample: 3.17 µg/L | 5/6 | SYR4 | 2013–2019 |
| Bromodichloromethane | 5.881 µg/L No EPA limit set
worst single sample: 5.95 µg/L | 4/6 | SYR4 | 2013–2019 |
| Dibromochloromethane | 3.312 µg/L No EPA limit set
worst single sample: 3.36 µg/L | 4/6 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 25.485 µg/L 42% of the EPA limit 60 µg/L
worst single sample: 27 µg/L | 4/6 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 18.327 µg/L No EPA limit set
worst single sample: 19.4 µg/L | 3/6 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 0.9950 µg/L No EPA limit set
worst single sample: 1 µg/L | 2/6 | SYR4 | 2013–2019 |
| Nitrate | 1000 µg/L 10% of the EPA limit 10000 µg/L | 2/18 | SYR4 | 2012–2019 |
| Barium | 268 µg/L 13% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2012 |
| Combined Radium (-226 And -228) | 1.73 pCi/L 35% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2012–2018 |
45 contaminants tested, none detected
Utility contact
Frequently asked questions about Wilton Water Supply
Is Wilton Water Supply tap water safe to drink?
EPA monitoring detected 16 contaminants in Wilton Water Supply's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Wilton Water Supply's water?
EPA monitoring detected Fluoride, Copper, Lead, Lead, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Wilton Water Supply serve?
Wilton Water Supply reports serving 2,924 people in Iowa, per its EPA record.
Has Wilton Water Supply had any water quality violations?
The EPA has 12 violations on file for Wilton Water Supply, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.