Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2002-06-01 → 2002-06-30 |
| MR | Monitoring | Resolved | 2002-06-01 → 2002-06-30 |
| MR | Monitoring | Resolved | 2002-06-01 → 2002-06-30 |
| MR | Monitoring | Resolved | 2002-06-01 → 2002-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 216.5 µg/L 17% of the EPA limit 1300 µg/L
worst single sample: 300 µg/L | 28/30 | SYR4 | 2012–2018 |
| Nitrate | 900 µg/L 9% of the EPA limit 10000 µg/L | 14/18 | SYR4 | 2012–2019 |
| Lead | 0.0140 mg/L 93% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2024 |
| Lead | 20.5 µg/L 137% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 31 µg/L | 11/30 | SYR4 | 2012–2018 |
| Bromodichloromethane | 9.025 µg/L No EPA limit set
worst single sample: 9.2 µg/L | 6/7 | SYR4 | 2013–2019 |
| Chloroform | 8.075 µg/L No EPA limit set
worst single sample: 8.2 µg/L | 6/7 | SYR4 | 2013–2019 |
| Dibromochloromethane | 5.8 µg/L No EPA limit set
worst single sample: 5.9 µg/L | 6/7 | SYR4 | 2013–2019 |
| TTHM | 23.75 µg/L 30% of the EPA limit 80 µg/L
worst single sample: 24 µg/L | 6/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 3 µg/L No EPA limit set | 5/7 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 4/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 3 µg/L No EPA limit set | 4/7 | SYR4 | 2013–2019 |
| Bromoform | 0.8000 µg/L No EPA limit set | 3/7 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 3.15 pCi/L 63% of the EPA limit 5 pCi/L
worst single sample: 3.2 pCi/L | 3/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 7.9 µg/L 13% of the EPA limit 60 µg/L
worst single sample: 8 µg/L | 3/7 | SYR4 | 2013–2019 |
| Fluoride | 840 µg/L 21% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2012 |
46 contaminants tested, none detected
Utility contact
Frequently asked questions about Burt Water Supply
Is Burt Water Supply tap water safe to drink?
EPA monitoring detected 15 contaminants in Burt Water Supply's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Burt Water Supply's water?
EPA monitoring detected Copper, Nitrate, Lead, Lead, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Burt Water Supply serve?
Burt Water Supply reports serving 418 people in Iowa, per its EPA record.
Has Burt Water Supply had any water quality violations?
The EPA has 4 violations on file for Burt Water Supply, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.