Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Resolved | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Resolved | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Resolved | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Resolved | 1995-10-01 → 1995-10-31 |
| MR | Monitoring | Resolved | 2002-04-01 → 2003-03-31 |
| MR | Monitoring | Resolved | 2002-04-01 → 2003-03-31 |
| MR | Monitoring | Resolved | 2002-04-01 → 2003-03-31 |
| MR | Monitoring | Resolved | 2002-04-01 → 2003-03-31 |
| MR | Monitoring | Resolved | 2000-09-01 → 2000-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 213.5 µg/L 16% of the EPA limit 1300 µg/L
worst single sample: 220 µg/L | 14/15 | SYR4 | 2013–2019 |
| Lead | 0.0100 mg/L 67% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Lead | 7.65 µg/L 51% of the EPA limit 15 µg/L
worst single sample: 9 µg/L | 10/15 | SYR4 | 2013–2019 |
| Bromodichloromethane | 1.74 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 4/4 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.625 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 4/4 | SYR4 | 2013–2019 |
| Chloroform | 1.44 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 3/4 | SYR4 | 2013–2019 |
| TTHM | 4.59 µg/L 5.7% of the EPA limit 80 µg/L
worst single sample: 4.6 µg/L | 3/4 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.285 pCi/L 26% of the EPA limit 5 pCi/L
worst single sample: 1.3 pCi/L | 2/2 | SYR4 | 2013–2019 |
| Barium | 350 µg/L 18% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2013 |
| Bromoform | 0.5000 µg/L No EPA limit set | 1/4 | SYR4 | 2013–2019 |
| Fluoride | 250 µg/L 6.3% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2013 |
| Trichloroacetic Acid | 1 µg/L No EPA limit set | 1/4 | SYR4 | 2013–2019 |
48 contaminants tested, none detected
Utility contact
Frequently asked questions about Twin View Heights
Is Twin View Heights tap water safe to drink?
EPA monitoring detected 12 contaminants in Twin View Heights's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Twin View Heights's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Twin View Heights serve?
Twin View Heights reports serving 155 people in Iowa, per its EPA record.
Has Twin View Heights had any water quality violations?
The EPA has 84 violations on file for Twin View Heights, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.