Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1990-04-01 → 1990-06-30 |
| MCL | Health-based | Resolved | 1990-04-01 → 1990-06-30 |
| MCL | Health-based | Resolved | 1990-04-01 → 1990-06-30 |
| MCL | Health-based | Resolved | 1990-04-01 → 1990-06-30 |
| MCL | Health-based | Resolved | 1990-04-01 → 1990-06-30 |
| MCL | Health-based | Resolved | 1990-04-01 → 1990-06-30 |
| MCL | Health-based | Resolved | 1990-04-01 → 1990-06-30 |
| MCL | Health-based | Resolved | 1990-04-01 → 1990-06-30 |
| MCL | Health-based | Resolved | 1990-04-01 → 1990-06-30 |
| MCL | Health-based | Resolved | 1990-04-01 → 1990-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0142 mg/L 95% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Copper | 120.8 µg/L 9.3% of the EPA limit 1300 µg/L
worst single sample: 128 µg/L | 10/10 | SYR4 | 2014–2017 |
| Lead | 5.3 µg/L 35% of the EPA limit 15 µg/L
worst single sample: 6.3 µg/L | 6/10 | SYR4 | 2014–2017 |
| Chloroform | 3.261 µg/L No EPA limit set
worst single sample: 3.35 µg/L | 3/3 | SYR4 | 2013–2019 |
| Bromodichloromethane | 1.589 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 2/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 0.7195 µg/L No EPA limit set
worst single sample: 0.7200 µg/L | 2/3 | SYR4 | 2013–2019 |
| TTHM | 5.614 µg/L 7% of the EPA limit 80 µg/L
worst single sample: 5.67 µg/L | 2/3 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 0.8570 µg/L No EPA limit set
worst single sample: 0.8700 µg/L | 2/3 | SYR4 | 2013–2019 |
| Barium | 54.9 µg/L 2.7% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2013 |
| Combined Radium (-226 And -228) | 1 pCi/L 20% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Fluoride | 300 µg/L 7.5% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2013 |
49 contaminants tested, none detected
Utility contact
Frequently asked questions about Protivin Water Supply
Is Protivin Water Supply tap water safe to drink?
EPA monitoring detected 11 contaminants in Protivin Water Supply's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Protivin Water Supply's water?
EPA monitoring detected Lead, Copper, Lead, Chloroform, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Protivin Water Supply serve?
Protivin Water Supply reports serving 269 people in Iowa, per its EPA record.
Has Protivin Water Supply had any water quality violations?
The EPA has 18 violations on file for Protivin Water Supply, of which 10 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.