Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2010-06-01 → 2010-06-30 |
| MCL | Health-based | Resolved | 2010-06-01 → 2010-06-30 |
| MCL | Health-based | Resolved | 2010-06-01 → 2010-06-30 |
| MCL | Health-based | Resolved | 2010-06-01 → 2010-06-30 |
| MON | Monitoring | Resolved | 2024-05-01 → 2024-05-31 |
| MON | Monitoring | Resolved | 2024-05-01 → 2024-05-31 |
| MON | Monitoring | Resolved | 2024-05-01 → 2024-05-31 |
| MON | Monitoring | Resolved | 2024-05-01 → 2024-05-31 |
| MR | Monitoring | Resolved | 2018-10-01 → 2019-09-30 |
| MR | Monitoring | Resolved | 2018-10-01 → 2019-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 173.7 µg/L 13% of the EPA limit 1300 µg/L
worst single sample: 224 µg/L | 30/30 | SYR4 | 2012–2018 |
| Lead | 22.425 µg/L 150% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 49.8 µg/L | 16/30 | SYR4 | 2012–2018 |
| Lead | 0.0148 mg/L 99% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2024 |
| Chloroform | 0.6340 µg/L No EPA limit set
worst single sample: 0.6400 µg/L | 3/7 | SYR4 | 2013–2019 |
| Arsenic | 1.295 µg/L 13% of the EPA limit 10 µg/L
worst single sample: 1.3 µg/L | 2/3 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 0.5095 µg/L No EPA limit set
worst single sample: 0.5100 µg/L | 2/7 | SYR4 | 2013–2019 |
| Barium | 11.6 µg/L 0.6% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2013 |
| Dibromoacetic Acid | 0.5000 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Fluoride | 1500 µg/L 38% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2013 |
| Nitrite | 110 µg/L 11% of the EPA limit 1000 µg/L | 1/2 | SYR4 | 2019 |
50 contaminants tested, none detected
Utility contact
Frequently asked questions about Reinbeck Water Supply
Is Reinbeck Water Supply tap water safe to drink?
EPA monitoring detected 10 contaminants in Reinbeck Water Supply's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Reinbeck Water Supply's water?
EPA monitoring detected Copper, Lead, Lead, Chloroform, Arsenic, and others. The full list with the level and data source for each is above.
How many people does Reinbeck Water Supply serve?
Reinbeck Water Supply reports serving 1,662 people in Iowa, per its EPA record.
Has Reinbeck Water Supply had any water quality violations?
The EPA has 28 violations on file for Reinbeck Water Supply, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.