Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2008-10-01 → 2008-10-31 |
| MCL | Health-based | Resolved | 2008-10-01 → 2008-10-31 |
| MCL | Health-based | Resolved | 2008-10-01 → 2008-10-31 |
| MCL | Health-based | Resolved | 2008-10-01 → 2008-10-31 |
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-08-01 → 2008-08-31 |
| MCL | Health-based | Resolved | 2008-08-01 → 2008-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Copper | 233.45 µg/L 18% of the EPA limit 1300 µg/L
worst single sample: 260 µg/L | 10/10 | SYR4 | 2014–2017 |
| Lead | 5.075 µg/L 34% of the EPA limit 15 µg/L
worst single sample: 5.2 µg/L | 6/10 | SYR4 | 2014–2017 |
| Bromodichloromethane | 2.179 µg/L No EPA limit set
worst single sample: 2.25 µg/L | 3/3 | SYR4 | 2013–2019 |
| Chloroform | 10.975 µg/L No EPA limit set
worst single sample: 11.8 µg/L | 3/3 | SYR4 | 2013–2019 |
| TTHM | 13.237 µg/L 17% of the EPA limit 80 µg/L
worst single sample: 13.9 µg/L | 3/3 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.4 pCi/L 28% of the EPA limit 5 pCi/L | 2/2 | SYR4 | 2012–2018 |
| Dibromochloromethane | 1.426 µg/L No EPA limit set
worst single sample: 1.47 µg/L | 2/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 6.0245 µg/L No EPA limit set
worst single sample: 6.1 µg/L | 2/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 10.365 µg/L 17% of the EPA limit 60 µg/L
worst single sample: 10.6 µg/L | 2/3 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 1.9085 µg/L No EPA limit set
worst single sample: 1.94 µg/L | 2/3 | SYR4 | 2013–2019 |
| Chromium | 2.1 µg/L 2.1% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2014 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2014 |
| Monochloroacetic Acid | 2.54 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
46 contaminants tested, none detected
Utility contact
Frequently asked questions about Green Brier Subdivision
Is Green Brier Subdivision tap water safe to drink?
EPA monitoring detected 14 contaminants in Green Brier Subdivision's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Green Brier Subdivision's water?
EPA monitoring detected Lead, Copper, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Green Brier Subdivision serve?
Green Brier Subdivision reports serving 35 people in Iowa, per its EPA record.
Has Green Brier Subdivision had any water quality violations?
The EPA has 161 violations on file for Green Brier Subdivision, of which 52 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.