Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Resolved | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Resolved | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Resolved | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Resolved | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Resolved | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Resolved | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Resolved | 1993-07-01 → 1993-07-31 |
| MCL | Health-based | Resolved | 1992-08-01 → 1992-08-31 |
| MCL | Health-based | Resolved | 1992-08-01 → 1992-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 236.2 µg/L 18% of the EPA limit 1300 µg/L
worst single sample: 281 µg/L | 15/15 | SYR4 | 2013–2019 |
| Lead | 0.0048 mg/L 32% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Lead | 9.92 µg/L 66% of the EPA limit 15 µg/L
worst single sample: 17.9 µg/L | 13/15 | SYR4 | 2013–2019 |
| Chloroform | 2.636 µg/L No EPA limit set
worst single sample: 2.85 µg/L | 3/3 | SYR4 | 2013–2019 |
| Atrazine | 0.3000 µg/L 10% of the EPA limit 3 µg/L | 1/7 | SYR4 | 2012–2018 |
| Barium | 91.5 µg/L 4.6% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2012 |
| Bromodichloromethane | 1.28 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.9 pCi/L 38% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2014 |
| Dibromochloromethane | 1.16 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Fluoride | 100 µg/L 2.5% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2012 |
| Monochloroacetic Acid | 4.15 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Simazine | 0.1500 µg/L 3.8% of the EPA limit 4 µg/L | 1/4 | SYR4 | 2012–2018 |
| TTHM | 4.13 µg/L 5.2% of the EPA limit 80 µg/L | 1/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 5.41 µg/L 9% of the EPA limit 60 µg/L | 1/3 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 0.6500 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
45 contaminants tested, none detected
Utility contact
Frequently asked questions about Hickory Acres
Is Hickory Acres tap water safe to drink?
EPA monitoring detected 15 contaminants in Hickory Acres's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hickory Acres's water?
EPA monitoring detected Copper, Lead, Lead, Chloroform, Atrazine, and others. The full list with the level and data source for each is above.
How many people does Hickory Acres serve?
Hickory Acres reports serving 115 people in Iowa, per its EPA record.
Has Hickory Acres had any water quality violations?
The EPA has 28 violations on file for Hickory Acres, of which 20 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.