Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 1992-07-01 |
| MR | Monitoring | Resolved | 1992-07-01 |
| MR | Monitoring | Resolved | 1992-07-01 |
| MR | Monitoring | Resolved | 1992-07-01 |
| MR | Monitoring | Resolved | 1992-07-01 |
| MR | Monitoring | Resolved | 1992-07-01 |
| MR | Monitoring | Resolved | 1992-07-01 |
| MR | Monitoring | Resolved | 1992-07-01 |
| MR | Monitoring | Resolved | 1992-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 80 µg/L 6.2% of the EPA limit 1300 µg/L
worst single sample: 100 µg/L | 61/80 | SYR4 | 2013–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2023 |
| Nitrate | 3900 µg/L 39% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Tetrachloroethylene | 1.15 µg/L 23% of the EPA limit 5 µg/L
worst single sample: 1.3 µg/L | 16/47 | SYR4 | 2013–2019 |
| Lead | 6.4 µg/L 43% of the EPA limit 15 µg/L
worst single sample: 8 µg/L | 9/80 | SYR4 | 2013–2019 |
| Bromodichloromethane | 8.1 µg/L No EPA limit set | 8/8 | SYR4 | 2012–2019 |
| Chloroform | 15.3 µg/L No EPA limit set
worst single sample: 16 µg/L | 8/8 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2 µg/L No EPA limit set | 8/8 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6.72 µg/L No EPA limit set
worst single sample: 7 µg/L | 8/8 | SYR4 | 2012–2019 |
| TTHM | 29.6 µg/L 37% of the EPA limit 80 µg/L
worst single sample: 31 µg/L | 8/8 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 2 µg/L No EPA limit set | 7/8 | SYR4 | 2012–2019 |
| Bromoform | 2.425 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 6/8 | SYR4 | 2012–2019 |
| Xylenes, Total | 20.375 µg/L 0.2% of the EPA limit 10000 µg/L
worst single sample: 25 µg/L | 6/10 | SYR4 | 2013–2019 |
| Ethylbenzene | 4.235 µg/L 0.6% of the EPA limit 700 µg/L
worst single sample: 4.4 µg/L | 2/6 | SYR4 | 2013–2019 |
| Lithium | 10 µg/L No EPA limit set | 1/2 | UCMR-5 | 2024 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Atlantic Municipal Utilities
Is Atlantic Municipal Utilities tap water safe to drink?
EPA monitoring detected 15 contaminants in Atlantic Municipal Utilities's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Atlantic Municipal Utilities's water?
EPA monitoring detected Copper, Lead, Nitrate, Tetrachloroethylene, Lead, and others. The full list with the level and data source for each is above.
How many people does Atlantic Municipal Utilities serve?
Atlantic Municipal Utilities reports serving 7,252 people in Iowa, per its EPA record.
Has Atlantic Municipal Utilities had any water quality violations?
The EPA has 9 violations on file for Atlantic Municipal Utilities, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.