Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1998-08-01 → 1998-08-31 |
| MCL | Health-based | Resolved | 1998-08-01 → 1998-08-31 |
| MCL | Health-based | Resolved | 1998-08-01 → 1998-08-31 |
| MCL | Health-based | Resolved | 1998-08-01 → 1998-08-31 |
| MR | Monitoring | Resolved | 2024-06-01 |
| MR | Monitoring | Resolved | 2024-06-01 |
| MR | Monitoring | Resolved | 2024-06-01 |
| MR | Monitoring | Resolved | 2024-06-01 |
| Other | Monitoring | Resolved | 2002-07-01 |
| Other | Monitoring | Resolved | 2002-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0110 mg/L 73% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Copper | 266 µg/L 20% of the EPA limit 1300 µg/L
worst single sample: 310 µg/L | 12/15 | SYR4 | 2012–2018 |
| Nitrate | 380 µg/L 3.8% of the EPA limit 10000 µg/L | 10/16 | SYR4 | 2012–2019 |
| Lead | 7.5 µg/L 50% of the EPA limit 15 µg/L
worst single sample: 8 µg/L | 6/15 | SYR4 | 2012–2018 |
| Bromodichloromethane | 8.14 µg/L No EPA limit set
worst single sample: 8.3 µg/L | 3/3 | SYR4 | 2013–2019 |
| Bromoform | 3.11 µg/L No EPA limit set
worst single sample: 3.2 µg/L | 3/3 | SYR4 | 2013–2019 |
| Chloroform | 6.59 µg/L No EPA limit set
worst single sample: 6.9 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2 µg/L No EPA limit set | 3/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 8.68 µg/L No EPA limit set
worst single sample: 8.9 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 3.7 µg/L No EPA limit set
worst single sample: 4 µg/L | 3/3 | SYR4 | 2013–2019 |
| TTHM | 23 µg/L 29% of the EPA limit 80 µg/L | 3/3 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.8 µg/L No EPA limit set
worst single sample: 3 µg/L | 3/3 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.3 pCi/L 26% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Fluoride | 1100 µg/L 28% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2013 |
| Total Haloacetic Acids (HAA5) | 9 µg/L 15% of the EPA limit 60 µg/L | 1/3 | SYR4 | 2013–2019 |
43 contaminants tested, none detected
Utility contact
Frequently asked questions about Somers Water Works
Is Somers Water Works tap water safe to drink?
EPA monitoring detected 15 contaminants in Somers Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Somers Water Works's water?
EPA monitoring detected Lead, Copper, Nitrate, Lead, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Somers Water Works serve?
Somers Water Works reports serving 128 people in Iowa, per its EPA record.
Has Somers Water Works had any water quality violations?
The EPA has 52 violations on file for Somers Water Works, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.