Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2020-06-01 → 2020-06-30 |
| MR | Monitoring | Resolved | 2020-06-01 → 2020-06-30 |
| MR | Monitoring | Resolved | 2020-06-01 → 2020-06-30 |
| MR | Monitoring | Resolved | 2020-06-01 → 2020-06-30 |
| MR | Monitoring | Resolved | 2016-04-01 → 2016-06-30 |
| MR | Monitoring | Resolved | 2016-04-01 → 2016-06-30 |
| MR | Monitoring | Resolved | 2016-04-01 → 2016-06-30 |
| MR | Monitoring | Resolved | 2016-04-01 → 2016-06-30 |
| MR | Monitoring | Resolved | 2007-12-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2007-12-01 → 2007-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chlorite | 380.95 µg/L 38% of the EPA limit 1000 µg/L
worst single sample: 399 µg/L | 322/333 | SYR4 | 2013–2019 |
| Copper | 68.425 µg/L 5.3% of the EPA limit 1300 µg/L
worst single sample: 13900 µg/L | 88/92 | SYR4 | 2013–2019 |
| Lead | 5.96 µg/L 40% of the EPA limit 15 µg/L
worst single sample: 16.8 µg/L | 58/92 | SYR4 | 2013–2019 |
| Fluoride | 840 µg/L 21% of the EPA limit 4000 µg/L
worst single sample: 960 µg/L | 45/45 | SYR4 | 2013–2019 |
| Nitrite | 521 µg/L 52% of the EPA limit 1000 µg/L
worst single sample: 842 µg/L | 31/369 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 2.241 µg/L No EPA limit set
worst single sample: 2.26 µg/L | 20/29 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Trichloroacetic Acid | 1.025 µg/L No EPA limit set
worst single sample: 1.06 µg/L | 6/29 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.6585 µg/L No EPA limit set
worst single sample: 3.78 µg/L | 4/29 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 6.9675 µg/L 12% of the EPA limit 60 µg/L
worst single sample: 7.14 µg/L | 4/29 | SYR4 | 2012–2019 |
| Arsenic | 3.504 µg/L 35% of the EPA limit 10 µg/L
worst single sample: 3.52 µg/L | 2/2 | SYR4 | 2013–2016 |
| Dibromoacetic Acid | 0.5895 µg/L No EPA limit set
worst single sample: 0.5900 µg/L | 2/29 | SYR4 | 2012–2019 |
| Nitrate | 242 µg/L 2.4% of the EPA limit 10000 µg/L | 2/18 | SYR4 | 2012–2019 |
| Lithium | 130 µg/L No EPA limit set | 2/2 | UCMR-5 | 2024 |
| Barium | 5.49 µg/L 0.3% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2013 |
| Chloroform | 11 µg/L No EPA limit set | 1/29 | SYR4 | 2012–2019 |
75 contaminants tested, none detected
Utility contact
Frequently asked questions about Storm Lake Water Treatment Plant
Is Storm Lake Water Treatment Plant tap water safe to drink?
EPA monitoring detected 16 contaminants in Storm Lake Water Treatment Plant's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Storm Lake Water Treatment Plant's water?
EPA monitoring detected Chlorite, Copper, Lead, Fluoride, Nitrite, and others. The full list with the level and data source for each is above.
How many people does Storm Lake Water Treatment Plant serve?
Storm Lake Water Treatment Plant reports serving 11,431 people in Iowa, per its EPA record.
Has Storm Lake Water Treatment Plant had any water quality violations?
The EPA has 17 violations on file for Storm Lake Water Treatment Plant, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.