Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2021-05-01 → 2021-05-31 |
| TT | Health-based | Resolved | 2021-05-01 → 2021-05-31 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-04-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-04-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-04-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-04-30 |
| MCL | Health-based | Resolved | 2020-11-01 → 2020-11-30 |
| MCL | Health-based | Resolved | 2020-11-01 → 2020-11-30 |
| MCL | Health-based | Resolved | 2020-11-01 → 2020-11-30 |
| MCL | Health-based | Resolved | 2020-11-01 → 2020-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrite | 565 µg/L 56% of the EPA limit 1000 µg/L
worst single sample: 1830 µg/L | 39/208 | SYR4 | 2012–2019 |
| Copper | 201.6 µg/L 16% of the EPA limit 1300 µg/L
worst single sample: 302 µg/L | 30/30 | SYR4 | 2012–2018 |
| Lead | 17.09 µg/L 114% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 22.7 µg/L | 18/30 | SYR4 | 2012–2018 |
| Lead | 0.0059 mg/L 39% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2024 |
| Nitrate | 3500 µg/L 35% of the EPA limit 10000 µg/L | 12/40 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 2.38 pCi/L 48% of the EPA limit 5 pCi/L
worst single sample: 2.5 pCi/L | 3/4 | SYR4 | 2013–2019 |
| Barium | 6.795 µg/L 0.3% of the EPA limit 2000 µg/L
worst single sample: 6.8 µg/L | 2/2 | SYR4 | 2012 |
| Fluoride | 1590 µg/L 40% of the EPA limit 4000 µg/L
worst single sample: 1600 µg/L | 2/2 | SYR4 | 2012 |
| Monochloroacetic Acid | 2.364 µg/L No EPA limit set
worst single sample: 2.39 µg/L | 2/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 0.7960 µg/L No EPA limit set
worst single sample: 0.8100 µg/L | 2/7 | SYR4 | 2013–2019 |
| Bromoform | 0.7800 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 0.5700 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Toluene | 2.6 µg/L 0.3% of the EPA limit 1000 µg/L | 1/11 | SYR4 | 2012–2018 |
48 contaminants tested, none detected
Utility contact
Frequently asked questions about Keystone Water Supply
Is Keystone Water Supply tap water safe to drink?
EPA monitoring detected 13 contaminants in Keystone Water Supply's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Keystone Water Supply's water?
EPA monitoring detected Nitrite, Copper, Lead, Lead, Nitrate, and others. The full list with the level and data source for each is above.
How many people does Keystone Water Supply serve?
Keystone Water Supply reports serving 599 people in Iowa, per its EPA record.
Has Keystone Water Supply had any water quality violations?
The EPA has 107 violations on file for Keystone Water Supply, of which 25 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.