Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2005-05-01 → 2005-05-31 |
| MCL | Health-based | Archived | 2005-05-01 → 2005-05-31 |
| MCL | Health-based | Archived | 2005-05-01 → 2005-05-31 |
| MR | Monitoring | Archived | 1992-07-01 → 1992-12-31 |
| MR | Monitoring | Archived | 1992-07-01 → 1992-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 579.1 µg/L 45% of the EPA limit 1300 µg/L
worst single sample: 664 µg/L | 43/63 | SYR4 | 2012–2019 |
| Lead | 0.0090 mg/L 60% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2021 |
| TTHM | 7.05 µg/L 8.8% of the EPA limit 80 µg/L
worst single sample: 8.1 µg/L | 7/7 | SYR4 | 2013–2019 |
| Bromodichloromethane | 1.425 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 6/6 | SYR4 | 2013–2019 |
| Chloroform | 5.8 µg/L No EPA limit set
worst single sample: 6.6 µg/L | 6/6 | SYR4 | 2013–2019 |
| Ethylbenzene | 8.75 µg/L 1.3% of the EPA limit 700 µg/L
worst single sample: 9.8 µg/L | 6/10 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 3.675 µg/L 6.1% of the EPA limit 60 µg/L
worst single sample: 4 µg/L | 6/7 | SYR4 | 2013–2019 |
| Lead | 31.04 µg/L 207% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 36.4 µg/L | 5/63 | SYR4 | 2012–2019 |
| Xylenes, Total | 34.16 µg/L 0.3% of the EPA limit 10000 µg/L
worst single sample: 36.5 µg/L | 5/9 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 2.52 µg/L No EPA limit set
worst single sample: 2.7 µg/L | 4/6 | SYR4 | 2013–2019 |
| Fluoride | 359 µg/L 9% of the EPA limit 4000 µg/L
worst single sample: 370 µg/L | 3/10 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 2.63 µg/L No EPA limit set
worst single sample: 2.7 µg/L | 2/6 | SYR4 | 2013–2019 |
100 contaminants tested, none detected
Utility contact
Frequently asked questions about Hawaii Volcanoes Nat.Park
Is Hawaii Volcanoes Nat.Park tap water safe to drink?
EPA monitoring detected 12 contaminants in Hawaii Volcanoes Nat.Park's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hawaii Volcanoes Nat.Park's water?
EPA monitoring detected Copper, Lead, TTHM, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Hawaii Volcanoes Nat.Park serve?
Hawaii Volcanoes Nat.Park reports serving 4,201 people in Hawaii, per its EPA record.
Has Hawaii Volcanoes Nat.Park had any water quality violations?
The EPA has 5 violations on file for Hawaii Volcanoes Nat.Park, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.