Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2014-11-01 → 2014-11-30 |
| MCL | Health-based | Resolved | 2014-11-01 → 2014-11-30 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-10-31 |
| MON | Monitoring | Resolved | 2024-10-01 → 2024-10-31 |
| Other | Monitoring | Resolved | 2024-07-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| MR | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MON | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MR | Monitoring | Resolved | 2023-11-01 → 2023-11-30 |
| MON | Monitoring | Resolved | 2023-11-01 → 2023-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 98.016 µg/L 123% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 110 µg/L | 15/17 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 31.02 µg/L 52% of the EPA limit 60 µg/L
worst single sample: 31.72 µg/L | 15/16 | SYR4 | 2012–2019 |
| Lead | 0.0100 mg/L 67% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Fluoride | 150 µg/L 3.8% of the EPA limit 4000 µg/L | 4/4 | SYR4 | 2012–2018 |
| Nitrate | 170 µg/L 1.7% of the EPA limit 10000 µg/L | 4/12 | SYR4 | 2012–2019 |
| Barium | 22.46 µg/L 1.1% of the EPA limit 2000 µg/L
worst single sample: 22.6 µg/L | 2/2 | SYR4 | 2012–2018 |
| Antimony, Total | 0.1000 µg/L 1.7% of the EPA limit 6 µg/L | 1/2 | SYR4 | 2012–2018 |
| Arsenic | 1.1 µg/L 11% of the EPA limit 10 µg/L | 1/2 | SYR4 | 2012–2018 |
| Copper | 36 µg/L 2.8% of the EPA limit 1300 µg/L | 1/2 | SYR4 | 2012–2018 |
| Chromium | 1.4 µg/L 1.4% of the EPA limit 100 µg/L | 1/2 | SYR4 | 2012–2018 |
| Lead | 0.2000 µg/L 1.3% of the EPA limit 15 µg/L | 1/2 | SYR4 | 2012–2018 |
| Mercury | 0.6000 µg/L 30% of the EPA limit 2 µg/L | 1/2 | SYR4 | 2012–2018 |
| Nitrite | 50 µg/L 5% of the EPA limit 1000 µg/L | 1/6 | SYR4 | 2012–2019 |
56 contaminants tested, none detected
Utility contact
Frequently asked questions about Pelican Lake Water Plant
Is Pelican Lake Water Plant tap water safe to drink?
EPA monitoring detected 13 contaminants in Pelican Lake Water Plant's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Pelican Lake Water Plant's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Lead, Fluoride, Nitrate, and others. The full list with the level and data source for each is above.
How many people does Pelican Lake Water Plant serve?
Pelican Lake Water Plant reports serving 222 people in Florida, per its EPA record.
Has Pelican Lake Water Plant had any water quality violations?
The EPA has 48 violations on file for Pelican Lake Water Plant, of which 2 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.