Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
63
health-based violations
560
violations on file
12
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2023-06-01 → 2023-06-30 |
| MCL | Health-based | Archived | 2023-06-01 → 2023-06-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 89.05 µg/L 111% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 274 µg/L | 91/91 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 51.03 µg/L 85% of the EPA limit 60 µg/L
worst single sample: 74.9 µg/L | 90/90 | SYR4 | 2012–2019 |
| Chlorobenzene | 6.8655 µg/L 6.9% of the EPA limit 100 µg/L
worst single sample: 8.64 µg/L | 14/50 | SYR4 | 2012–2019 |
| Dalapon | 3.08 µg/L 1.5% of the EPA limit 200 µg/L
worst single sample: 4.1 µg/L | 13/25 | SYR4 | 2012–2019 |
| Lead | 0.0024 mg/L 16% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Nitrate | 880 µg/L 8.8% of the EPA limit 10000 µg/L | 12/14 | SYR4 | 2012–2019 |
| cis-1,2-Dichloroethylene | 5.225 µg/L 7.5% of the EPA limit 70 µg/L
worst single sample: 5.25 µg/L | 11/50 | SYR4 | 2012–2019 |
| Vinyl Chloride | 2.8165 µg/L 141% of the EPA limit, at the 95th percentile of samples — 2 µg/L
worst single sample: 2.89 µg/L | 8/50 | SYR4 | 2012–2019 |
| 1,1-Dichloroethylene | 1.3875 µg/L 20% of the EPA limit 7 µg/L
worst single sample: 1.65 µg/L | 6/50 | SYR4 | 2012–2019 |
| P-Dichlorobenzene | 1.625 µg/L 2.2% of the EPA limit 75 µg/L
worst single sample: 1.7 µg/L | 6/50 | SYR4 | 2012–2019 |
| Trichloroethylene | 3.396 µg/L 68% of the EPA limit 5 µg/L
worst single sample: 3.45 µg/L | 5/50 | SYR4 | 2012–2019 |
| O-Dichlorobenzene | 1.132 µg/L 0.2% of the EPA limit 600 µg/L
worst single sample: 1.23 µg/L | 3/50 | SYR4 | 2012–2019 |
| 1,1,1-Trichloroethane | 0.2409 µg/L 0.1% of the EPA limit 200 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| 1,1,2-Trichloroethane | 0.2419 µg/L 4.8% of the EPA limit 5 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| 1,2,4-Trichlorobenzene | 0.3985 µg/L 0.6% of the EPA limit 70 µg/L
worst single sample: 0.4100 µg/L | 2/50 | SYR4 | 2012–2019 |
| 1,2-Dichloroethane | 0.2423 µg/L 4.8% of the EPA limit 5 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| 1,2-Dichloropropane | 0.2434 µg/L 4.9% of the EPA limit 5 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| Benzene | 0.2412 µg/L 4.8% of the EPA limit 5 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| Carbon Tetrachloride | 0.2404 µg/L 4.8% of the EPA limit 5 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| Dichloromethane | 0.4251 µg/L 8.5% of the EPA limit 5 µg/L
worst single sample: 0.4400 µg/L | 2/50 | SYR4 | 2012–2019 |
| Ethylbenzene | 0.2412 µg/L 0% of the EPA limit 700 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| Fluoride | 210 µg/L 5.3% of the EPA limit 4000 µg/L | 2/2 | SYR4 | 2017 |
| Nitrite | 40.725 µg/L 4.1% of the EPA limit 1000 µg/L
worst single sample: 42.5 µg/L | 2/7 | SYR4 | 2012–2019 |
| Styrene | 0.2414 µg/L 0.2% of the EPA limit 100 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| Tetrachloroethylene | 0.2423 µg/L 4.8% of the EPA limit 5 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| Toluene | 0.2429 µg/L 0% of the EPA limit 1000 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| Xylenes, Total | 0.2478 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 0.2500 µg/L | 2/50 | SYR4 | 2012–2019 |
| trans-1,2-Dichloroethylene | 0.2415 µg/L 0.2% of the EPA limit 100 µg/L
worst single sample: 0.2500 µg/L | 2/49 | SYR4 | 2012–2019 |
| 2,4,5-TP | 0.0400 µg/L 0.1% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2017 |
| 2,4-D | 0.0970 µg/L 0.1% of the EPA limit 70 µg/L | 1/3 | SYR4 | 2012–2017 |
| Barium | 5.7 µg/L 0.3% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2017 |
| Cyanide | 5 µg/L 2.5% of the EPA limit 200 µg/L | 1/1 | SYR4 | 2017 |
| Dinoseb | 0.1500 µg/L 2.1% of the EPA limit 7 µg/L | 1/3 | SYR4 | 2012–2017 |
| Pentachlorophenol | 0.0140 µg/L 1.4% of the EPA limit 1 µg/L | 1/3 | SYR4 | 2012–2017 |
| Picloram | 0.0470 µg/L 0% of the EPA limit 500 µg/L | 1/3 | SYR4 | 2012–2017 |
58 contaminants tested, none detected
1,2-DIBROMO-3-CHLOROPROPANE11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosBhc-GammaBenzo(A)PyreneBeryllium, TotalCopperCadmiumCarbofuranChlordaneChromiumCombined UraniumDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDiquatEthylene DibromideEndothallEndrinGlyphosateGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoLeadMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPfdaPfdoaPfeesaPfhpsPfmbaPfmpaPFNAPfpesPftaPftrdaPfunaSeleniumSimazineThallium, TotalTotal Polychlorinated Biphenyls (PCB)ToxapheneLithium
Utility contact
Frequently asked questions about Riviera Beach Utility District, City of
Is Riviera Beach Utility District, City of tap water safe to drink?
EPA monitoring detected 42 contaminants in Riviera Beach Utility District, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Riviera Beach Utility District, City of's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Chlorobenzene, Dalapon, Lead, and others. The full list with the level and data source for each is above.
How many people does Riviera Beach Utility District, City of serve?
Riviera Beach Utility District, City of reports serving 46,762 people in Florida, per its EPA record.
Has Riviera Beach Utility District, City of had any water quality violations?
The EPA has 560 violations on file for Riviera Beach Utility District, City of, of which 63 are health-based (a contaminant limit or required treatment was breached) and 12 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.