Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2009-07-01 |
| MR | Monitoring | Resolved | 2009-07-01 |
| MR | Monitoring | Resolved | 2009-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 1110 µg/L 11% of the EPA limit 10000 µg/L | 12/18 | SYR4 | 2012–2019 |
| TTHM | 82.64 µg/L 103% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 102.8 µg/L | 9/9 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 29.928 µg/L 50% of the EPA limit 60 µg/L
worst single sample: 38.72 µg/L | 9/9 | SYR4 | 2013–2019 |
| Lead | 0.00050 mg/L 3.3% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2024 |
| Xylenes, Total | 1.905 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 2.1 µg/L | 4/8 | SYR4 | 2012–2019 |
| Barium | 14.23 µg/L 0.7% of the EPA limit 2000 µg/L
worst single sample: 15 µg/L | 3/3 | SYR4 | 2013–2019 |
| Ethylbenzene | 0.4700 µg/L 0.1% of the EPA limit 700 µg/L
worst single sample: 0.5000 µg/L | 3/6 | SYR4 | 2012–2019 |
| Arsenic | 1.295 µg/L 13% of the EPA limit 10 µg/L
worst single sample: 1.3 µg/L | 2/3 | SYR4 | 2013–2019 |
| Fluoride | 69 µg/L 1.7% of the EPA limit 4000 µg/L | 2/5 | SYR4 | 2013–2019 |
| Selenium | 1.57 µg/L 3.1% of the EPA limit 50 µg/L
worst single sample: 1.6 µg/L | 2/3 | SYR4 | 2013–2019 |
| Copper | 1.4 µg/L 0.1% of the EPA limit 1300 µg/L | 1/1 | SYR4 | 2019 |
| Chromium | 4.9 µg/L 4.9% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2013–2019 |
| Lead | 1.4 µg/L 9.3% of the EPA limit 15 µg/L | 1/3 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 893 µg/L 8.9% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2019 |
| Nitrite | 70 µg/L 7% of the EPA limit 1000 µg/L | 1/9 | SYR4 | 2012–2019 |
54 contaminants tested, none detected
Utility contact
Frequently asked questions about Hillcrest
Is Hillcrest tap water safe to drink?
EPA monitoring detected 15 contaminants in Hillcrest's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hillcrest's water?
EPA monitoring detected Nitrate, TTHM, Total Haloacetic Acids (HAA5), Lead, Xylenes, Total, and others. The full list with the level and data source for each is above.
How many people does Hillcrest serve?
Hillcrest reports serving 50 people in Florida, per its EPA record.
Has Hillcrest had any water quality violations?
The EPA has 3 violations on file for Hillcrest, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.