Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-09-01 → 2015-09-30 |
| MCL | Health-based | Archived | 2003-04-01 → 2003-04-30 |
| MCL | Health-based | Archived | 2002-09-01 → 2002-09-30 |
| MCL | Health-based | Archived | 1999-10-01 → 1999-10-31 |
| MCL | Health-based | Archived | 1999-10-01 → 1999-10-31 |
| MCL | Health-based | Resolved | 1996-04-01 → 1996-04-30 |
| MCL | Health-based | Resolved | 1996-04-01 → 1996-04-30 |
| MCL | Health-based | Archived | 1991-06-01 → 1991-06-30 |
| MR | Monitoring | Resolved | 2017-10-01 → 2017-12-31 |
| MR | Monitoring | Resolved | 2017-10-01 → 2017-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 61.0275 µg/L 76% of the EPA limit 80 µg/L
worst single sample: 82.22 µg/L | 94/94 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 32.3505 µg/L 54% of the EPA limit 60 µg/L
worst single sample: 37.89 µg/L | 94/94 | SYR4 | 2012–2019 |
| Nitrate | 140 µg/L 1.4% of the EPA limit 10000 µg/L | 28/78 | SYR4 | 2012–2019 |
| Fluoride | 852.5 µg/L 21% of the EPA limit 4000 µg/L
worst single sample: 890 µg/L | 16/16 | SYR4 | 2014–2017 |
| Lead | 0.00080 mg/L 5.3% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2023 |
| Barium | 188.495 µg/L 9.4% of the EPA limit 2000 µg/L
worst single sample: 274 µg/L | 8/8 | SYR4 | 2014–2017 |
| Copper | 19.3 µg/L 1.5% of the EPA limit 1300 µg/L
worst single sample: 20 µg/L | 8/8 | SYR4 | 2014–2017 |
| Lead | 0.9750 µg/L 6.5% of the EPA limit 15 µg/L
worst single sample: 1.1 µg/L | 6/8 | SYR4 | 2014–2017 |
| Di(2-ethylhexyl) Phthalate | 0.6500 µg/L 11% of the EPA limit 6 µg/L
worst single sample: 0.6600 µg/L | 3/28 | SYR4 | 2014–2019 |
| Selenium | 1.2 µg/L 2.4% of the EPA limit 50 µg/L | 3/8 | SYR4 | 2014–2017 |
| Antimony, Total | 0.4850 µg/L 8.1% of the EPA limit 6 µg/L
worst single sample: 0.5000 µg/L | 2/8 | SYR4 | 2014–2017 |
| Chromium | 0.6900 µg/L 0.7% of the EPA limit 100 µg/L
worst single sample: 0.7000 µg/L | 2/8 | SYR4 | 2014–2017 |
| Carbon Tetrachloride | 0.2000 µg/L 4% of the EPA limit 5 µg/L | 1/8 | SYR4 | 2014–2017 |
| Dichloromethane | 0.1400 µg/L 2.8% of the EPA limit 5 µg/L | 1/8 | SYR4 | 2014–2017 |
85 contaminants tested, none detected
Utility contact
Frequently asked questions about Atlantic Beach Water
Is Atlantic Beach Water tap water safe to drink?
EPA monitoring detected 14 contaminants in Atlantic Beach Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Atlantic Beach Water's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Nitrate, Fluoride, Lead, and others. The full list with the level and data source for each is above.
How many people does Atlantic Beach Water serve?
Atlantic Beach Water reports serving 23,503 people in Florida, per its EPA record.
Has Atlantic Beach Water had any water quality violations?
The EPA has 14 violations on file for Atlantic Beach Water, of which 8 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.