Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2025-02-01 |
| MCL | Health-based | Resolved | 2011-08-01 → 2011-08-31 |
| MCL | Health-based | Resolved | 2011-08-01 → 2011-08-31 |
| MCL | Health-based | Resolved | 2011-08-01 → 2011-08-31 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MCL | Health-based | Resolved | 1996-03-01 → 1996-03-31 |
| MCL | Health-based | Archived | 1996-03-01 → 1996-03-31 |
| RPT | Monitoring | Unaddressed | 2025-02-01 |
| MON | Monitoring | Resolved | 2023-09-01 → 2023-09-30 |
| MR | Monitoring | Unaddressed | 2022-01-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0014 mg/L 9.3% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2023 |
| Nitrate | 3400 µg/L 34% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Fluoride | 202 µg/L 5.1% of the EPA limit 4000 µg/L
worst single sample: 210 µg/L | 5/6 | SYR4 | 2012–2018 |
| Barium | 11.33 µg/L 0.6% of the EPA limit 2000 µg/L
worst single sample: 12 µg/L | 3/3 | SYR4 | 2012–2018 |
| Copper | 4.48 µg/L 0.3% of the EPA limit 1300 µg/L
worst single sample: 4.5 µg/L | 3/3 | SYR4 | 2012–2018 |
| Chromium | 8.47 µg/L 8.5% of the EPA limit 100 µg/L
worst single sample: 9.3 µg/L | 3/3 | SYR4 | 2012–2018 |
| TTHM | 2.027 µg/L 2.5% of the EPA limit 80 µg/L
worst single sample: 2.1 µg/L | 3/4 | SYR4 | 2012–2018 |
| Arsenic | 0.9850 µg/L 9.9% of the EPA limit 10 µg/L
worst single sample: 1 µg/L | 2/3 | SYR4 | 2012–2018 |
| Antimony, Total | 0.4000 µg/L 6.7% of the EPA limit 6 µg/L | 1/3 | SYR4 | 2012–2018 |
| Combined Uranium | 0.8046 µg/L 2.7% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2018 |
| Di(2-ethylhexyl) Phthalate | 0.6900 µg/L 12% of the EPA limit 6 µg/L | 1/12 | SYR4 | 2012–2018 |
| Lead | 0.2000 µg/L 1.3% of the EPA limit 15 µg/L | 1/3 | SYR4 | 2012–2018 |
| Mercury | 0.1000 µg/L 5% of the EPA limit 2 µg/L | 1/3 | SYR4 | 2012–2018 |
| Selenium | 2 µg/L 4% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 1.06 µg/L 1.8% of the EPA limit 60 µg/L | 1/4 | SYR4 | 2012–2018 |
55 contaminants tested, none detected
Utility contact
Frequently asked questions about Santa Fe Hills Subdivision
Is Santa Fe Hills Subdivision tap water safe to drink?
EPA monitoring detected 15 contaminants in Santa Fe Hills Subdivision's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Santa Fe Hills Subdivision's water?
EPA monitoring detected Lead, Nitrate, Fluoride, Barium, Copper, and others. The full list with the level and data source for each is above.
How many people does Santa Fe Hills Subdivision serve?
Santa Fe Hills Subdivision reports serving 200 people in Florida, per its EPA record.
Has Santa Fe Hills Subdivision had any water quality violations?
The EPA has 77 violations on file for Santa Fe Hills Subdivision, of which 7 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.