Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 23.84 µg/L 1.8% of the EPA limit 1300 µg/L
worst single sample: 46 µg/L | 33/33 | SYR4 | 2012–2019 |
| Chloroform | 6.01 µg/L No EPA limit set
worst single sample: 6.97 µg/L | 31/31 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.715 µg/L No EPA limit set
worst single sample: 3.07 µg/L | 31/31 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.51 µg/L No EPA limit set
worst single sample: 5.04 µg/L | 30/31 | SYR4 | 2012–2019 |
| Xylenes, Total | 2.879 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 3.53 µg/L | 15/29 | SYR4 | 2012–2019 |
| Lead | 0.00033 mg/L 2.2% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Toluene | 1.1625 µg/L 0.1% of the EPA limit 1000 µg/L
worst single sample: 1.26 µg/L | 6/30 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 2.5568 µg/L No EPA limit set
worst single sample: 2.596 µg/L | 5/5 | SYR4 | 2013–2019 |
| Fluoride | 108 µg/L 2.7% of the EPA limit 4000 µg/L
worst single sample: 110 µg/L | 5/8 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 4.7972 µg/L 8% of the EPA limit 60 µg/L
worst single sample: 4.8 µg/L | 5/5 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.38 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 5/5 | SYR4 | 2013–2019 |
| Ethylbenzene | 0.8580 µg/L 0.1% of the EPA limit 700 µg/L
worst single sample: 0.8800 µg/L | 3/30 | SYR4 | 2012–2019 |
| TTHM | 14.616 µg/L 18% of the EPA limit 80 µg/L
worst single sample: 14.64 µg/L | 3/3 | SYR4 | 2013–2019 |
| Arsenic | 0.5000 µg/L 5% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2013 |
| Chromium | 3.1 µg/L 3.1% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2013 |
42 contaminants tested, none detected
Frequently asked questions about Kenton Pump District
Is Kenton Pump District tap water safe to drink?
EPA monitoring detected 15 contaminants in Kenton Pump District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Kenton Pump District's water?
EPA monitoring detected Copper, Chloroform, Dibromochloromethane, Bromodichloromethane, Xylenes, Total, and others. The full list with the level and data source for each is above.
How many people does Kenton Pump District serve?
Kenton Pump District reports serving 465 people, per its EPA record.
Has Kenton Pump District had any water quality violations?
The EPA has no formal drinking-water violations on file for Kenton Pump District.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.