Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2024-10-01 |
| MR | Monitoring | Resolved | 2024-10-01 |
| MR | Monitoring | Resolved | 2024-10-01 |
| Other | Monitoring | Resolved | 2022-07-01 |
| Other | Monitoring | Resolved | 2022-07-01 |
| MR | Monitoring | Resolved | 2018-10-01 |
| MR | Monitoring | Resolved | 2018-10-01 |
| MR | Monitoring | Resolved | 2018-10-01 |
| Other | Monitoring | Resolved | 2018-07-01 |
| Other | Monitoring | Resolved | 2018-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 254 µg/L 20% of the EPA limit 1300 µg/L
worst single sample: 470 µg/L | 25/30 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Lead | 48.69 µg/L 325% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 66 µg/L | 7/31 | SYR4 | 2012–2019 |
| Fluoride | 123.45 µg/L 3.1% of the EPA limit 4000 µg/L
worst single sample: 124.6 µg/L | 6/8 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.302 µg/L No EPA limit set
worst single sample: 3.62 µg/L | 4/4 | SYR4 | 2012–2018 |
| Dibromochloromethane | 3.391 µg/L No EPA limit set
worst single sample: 3.73 µg/L | 4/4 | SYR4 | 2012–2018 |
| Chloroform | 2.673 µg/L No EPA limit set
worst single sample: 2.74 µg/L | 3/4 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 1.47785 µg/L No EPA limit set
worst single sample: 1.52 µg/L | 2/2 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 1.25705 µg/L No EPA limit set
worst single sample: 1.29 µg/L | 2/2 | SYR4 | 2014–2017 |
| TTHM | 9.928 µg/L 12% of the EPA limit 80 µg/L
worst single sample: 10.29 µg/L | 2/2 | SYR4 | 2014–2017 |
| Total Haloacetic Acids (HAA5) | 2.75535 µg/L 4.6% of the EPA limit 60 µg/L
worst single sample: 2.81 µg/L | 2/2 | SYR4 | 2014–2017 |
| Arsenic | 0.5000 µg/L 5% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2015 |
| Bromoform | 0.8700 µg/L No EPA limit set | 1/4 | SYR4 | 2012–2018 |
| Chromium | 4.9 µg/L 4.9% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2015 |
| Combined Radium (-226 And -228) | 1.168 pCi/L 23% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2016 |
| Monobromoacetic Acid | 0.0980 µg/L No EPA limit set | 1/2 | SYR4 | 2014–2017 |
| Trichloroacetic Acid | 0.3110 µg/L No EPA limit set | 1/2 | SYR4 | 2014–2017 |
34 contaminants tested, none detected
Utility contact
Frequently asked questions about Fox Pointe Subdivision
Is Fox Pointe Subdivision tap water safe to drink?
EPA monitoring detected 17 contaminants in Fox Pointe Subdivision's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fox Pointe Subdivision's water?
EPA monitoring detected Copper, Lead, Lead, Fluoride, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Fox Pointe Subdivision serve?
Fox Pointe Subdivision reports serving 500 people in Delaware, per its EPA record.
Has Fox Pointe Subdivision had any water quality violations?
The EPA has 15 violations on file for Fox Pointe Subdivision, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.