Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2001-10-01 → 2001-12-31 |
| MCL | Health-based | Resolved | 2001-10-01 → 2001-12-31 |
| MCL | Health-based | Resolved | 2001-10-01 → 2001-12-31 |
| Other | Monitoring | Resolved | 2002-07-01 → 2002-07-25 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 18.425 µg/L 1.4% of the EPA limit 1300 µg/L
worst single sample: 20 µg/L | 16/17 | SYR4 | 2013–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2025 |
| Bromodichloromethane | 8.664 µg/L No EPA limit set
worst single sample: 8.94 µg/L | 4/5 | SYR4 | 2012–2018 |
| Dibromochloromethane | 9.8755 µg/L No EPA limit set
worst single sample: 10.3 µg/L | 4/5 | SYR4 | 2012–2018 |
| Chloroform | 5.012 µg/L No EPA limit set
worst single sample: 5.11 µg/L | 3/5 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 3.794 µg/L No EPA limit set
worst single sample: 3.86 µg/L | 3/3 | SYR4 | 2012–2017 |
| Dichloroacetic Acid | 2.762 µg/L No EPA limit set
worst single sample: 2.88 µg/L | 3/3 | SYR4 | 2012–2017 |
| Total Haloacetic Acids (HAA5) | 8.203 µg/L 14% of the EPA limit 60 µg/L
worst single sample: 8.57 µg/L | 3/3 | SYR4 | 2012–2017 |
| Arsenic | 0.5000 µg/L 5% of the EPA limit 10 µg/L | 2/3 | SYR4 | 2012–2018 |
| Bromoform | 3.0035 µg/L No EPA limit set
worst single sample: 3.08 µg/L | 2/5 | SYR4 | 2012–2018 |
| Chromium | 2.43 µg/L 2.4% of the EPA limit 100 µg/L
worst single sample: 2.5 µg/L | 2/3 | SYR4 | 2012–2018 |
| Di(2-ethylhexyl) Phthalate | 0.7643 µg/L 13% of the EPA limit 6 µg/L
worst single sample: 0.8000 µg/L | 2/6 | SYR4 | 2017–2019 |
| TTHM | 27.0425 µg/L 34% of the EPA limit 80 µg/L
worst single sample: 27.4 µg/L | 2/2 | SYR4 | 2012–2017 |
| Trichloroacetic Acid | 1.8035 µg/L No EPA limit set
worst single sample: 1.83 µg/L | 2/3 | SYR4 | 2012–2017 |
| Di(2-ethylhexyl) Adipate | 0.0620 µg/L 0% of the EPA limit 400 µg/L | 1/6 | SYR4 | 2017–2019 |
| Fluoride | 75.6 µg/L 1.9% of the EPA limit 4000 µg/L | 1/8 | SYR4 | 2012–2019 |
| Lead | 1.3 µg/L 8.7% of the EPA limit 15 µg/L | 1/18 | SYR4 | 2012–2019 |
58 contaminants tested, none detected
Frequently asked questions about Sea Winds Pump District
Is Sea Winds Pump District tap water safe to drink?
EPA monitoring detected 17 contaminants in Sea Winds Pump District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Sea Winds Pump District's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Dibromochloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Sea Winds Pump District serve?
Sea Winds Pump District reports serving 141 people, per its EPA record.
Has Sea Winds Pump District had any water quality violations?
The EPA has 4 violations on file for Sea Winds Pump District, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.