Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2002-07-01 → 2002-07-25 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 26.78 µg/L 2.1% of the EPA limit 1300 µg/L
worst single sample: 36.4 µg/L | 24/26 | SYR4 | 2013–2019 |
| Bromodichloromethane | 4.852 µg/L No EPA limit set
worst single sample: 5.02 µg/L | 15/16 | SYR4 | 2012–2019 |
| Chloroform | 12.228 µg/L No EPA limit set
worst single sample: 17.8 µg/L | 15/16 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.408 µg/L No EPA limit set
worst single sample: 2.59 µg/L | 15/16 | SYR4 | 2012–2019 |
| TTHM | 16.528 µg/L 21% of the EPA limit 80 µg/L
worst single sample: 16.54 µg/L | 13/14 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 3.3388 µg/L No EPA limit set
worst single sample: 3.49 µg/L | 9/9 | SYR4 | 2012–2019 |
| Fluoride | 280 µg/L 7% of the EPA limit 4000 µg/L | 9/9 | SYR4 | 2012–2019 |
| Lead | 0.00059 mg/L 3.9% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2023 |
| Total Haloacetic Acids (HAA5) | 6.188 µg/L 10% of the EPA limit 60 µg/L
worst single sample: 6.22 µg/L | 9/9 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 3.1856 µg/L No EPA limit set
worst single sample: 3.25 µg/L | 9/9 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 0.8210 µg/L 14% of the EPA limit 6 µg/L
worst single sample: 0.8900 µg/L | 4/11 | SYR4 | 2014–2019 |
| Nitrate | 498.3 µg/L 5% of the EPA limit 10000 µg/L | 4/16 | SYR4 | 2012–2019 |
| Lead | 2.41 µg/L 16% of the EPA limit 15 µg/L
worst single sample: 2.6 µg/L | 3/26 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 488.385 µg/L 4.9% of the EPA limit 10000 µg/L
worst single sample: 498.3 µg/L | 2/8 | SYR4 | 2012–2019 |
| Barium | 71.73 µg/L 3.6% of the EPA limit 2000 µg/L | 1/3 | SYR4 | 2013–2019 |
| Chromium | 2.8 µg/L 2.8% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2013–2019 |
| Di(2-ethylhexyl) Adipate | 0.1100 µg/L 0% of the EPA limit 400 µg/L | 1/11 | SYR4 | 2014–2019 |
59 contaminants tested, none detected
Frequently asked questions about Clearbrooke Estates Pump District
Is Clearbrooke Estates Pump District tap water safe to drink?
EPA monitoring detected 17 contaminants in Clearbrooke Estates Pump District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Clearbrooke Estates Pump District's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Clearbrooke Estates Pump District serve?
Clearbrooke Estates Pump District reports serving 768 people, per its EPA record.
Has Clearbrooke Estates Pump District had any water quality violations?
The EPA has 1 violation on file for Clearbrooke Estates Pump District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.