Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2016-07-01 |
| Other | Monitoring | Resolved | 2016-07-01 |
| MR | Monitoring | Resolved | 1994-01-01 → 1996-06-24 |
| MR | Monitoring | Resolved | 1994-01-01 → 1996-06-24 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 4145 µg/L 41% of the EPA limit 10000 µg/L
worst single sample: 4200 µg/L | 32/32 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 4125 µg/L 41% of the EPA limit 10000 µg/L
worst single sample: 4200 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0069 mg/L 46% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Copper | 205 µg/L 16% of the EPA limit 1300 µg/L
worst single sample: 290 µg/L | 11/15 | SYR4 | 2013–2019 |
| Dibromochloromethane | 12.124 µg/L No EPA limit set
worst single sample: 16.33 µg/L | 7/8 | SYR4 | 2012–2019 |
| Bromodichloromethane | 6.69 µg/L No EPA limit set
worst single sample: 8.49 µg/L | 6/8 | SYR4 | 2012–2019 |
| Bromoform | 16.69 µg/L No EPA limit set
worst single sample: 21.15 µg/L | 6/8 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.769 µg/L No EPA limit set
worst single sample: 3.989 µg/L | 5/5 | SYR4 | 2015–2019 |
| Total Haloacetic Acids (HAA5) | 9.445 µg/L 16% of the EPA limit 60 µg/L
worst single sample: 11.084 µg/L | 5/5 | SYR4 | 2015–2019 |
| Chloroform | 6.829 µg/L No EPA limit set
worst single sample: 7.69 µg/L | 4/8 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 3.09875 µg/L No EPA limit set
worst single sample: 3.194 µg/L | 2/5 | SYR4 | 2015–2019 |
| Lead | 9.62 µg/L 64% of the EPA limit 15 µg/L
worst single sample: 10 µg/L | 2/15 | SYR4 | 2013–2019 |
| TTHM | 4.201 µg/L 5.3% of the EPA limit 80 µg/L
worst single sample: 4.21 µg/L | 2/2 | SYR4 | 2015 |
| Combined Radium (-226 And -228) | 0.6650 pCi/L 13% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2013 |
| Fluoride | 180 µg/L 4.5% of the EPA limit 4000 µg/L | 1/16 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 3.901 µg/L No EPA limit set | 1/5 | SYR4 | 2015–2019 |
| Xylenes, Total | 0.6000 µg/L 0% of the EPA limit 10000 µg/L | 1/7 | SYR4 | 2013–2019 |
79 contaminants tested, none detected
Utility contact
Frequently asked questions about Sussex Shores Water Company
Is Sussex Shores Water Company tap water safe to drink?
EPA monitoring detected 17 contaminants in Sussex Shores Water Company's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Sussex Shores Water Company's water?
EPA monitoring detected Nitrate, Nitrate-Nitrite, Lead, Copper, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Sussex Shores Water Company serve?
Sussex Shores Water Company reports serving 12,450 people in Delaware, per its EPA record.
Has Sussex Shores Water Company had any water quality violations?
The EPA has 4 violations on file for Sussex Shores Water Company, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.