Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Resolved | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Resolved | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Resolved | 2011-05-01 → 2011-05-31 |
| MCL | Health-based | Archived | 1993-01-01 → 1993-03-31 |
| MCL | Health-based | Archived | 1993-01-01 → 1993-03-31 |
| MCL | Health-based | Resolved | 1992-07-01 → 1992-09-30 |
| MCL | Health-based | Resolved | 1992-07-01 → 1992-09-30 |
| MCL | Health-based | Archived | 1992-07-01 → 1992-09-30 |
| Other | Monitoring | Resolved | 2013-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 135.86 µg/L 3.4% of the EPA limit 4000 µg/L
worst single sample: 140 µg/L | 13/16 | SYR4 | 2012–2019 |
| Copper | 14.8 µg/L 1.1% of the EPA limit 1300 µg/L
worst single sample: 15.5 µg/L | 11/13 | SYR4 | 2012–2018 |
| Chloroform | 2.8575 µg/L No EPA limit set
worst single sample: 2.98 µg/L | 8/9 | SYR4 | 2012–2019 |
| TTHM | 3.76 µg/L 4.7% of the EPA limit 80 µg/L
worst single sample: 4.2 µg/L | 5/5 | SYR4 | 2014–2019 |
| Bromodichloromethane | 1.2545 µg/L No EPA limit set
worst single sample: 1.31 µg/L | 4/9 | SYR4 | 2012–2019 |
| Lead | 0.00044 mg/L 2.9% of the EPA limit 0.0150 mg/L | 3/3 | LCR | 2021 |
| Chromium | 2.395 µg/L 2.4% of the EPA limit 100 µg/L
worst single sample: 2.4 µg/L | 2/4 | SYR4 | 2012–2018 |
| Combined Radium (-226 And -228) | 0.9281 pCi/L 19% of the EPA limit 5 pCi/L
worst single sample: 0.9350 pCi/L | 2/2 | SYR4 | 2014 |
| Dichloroacetic Acid | 1.1 µg/L No EPA limit set | 2/5 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 1.765 µg/L 2.9% of the EPA limit 60 µg/L
worst single sample: 1.8 µg/L | 2/5 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 0.2000 µg/L No EPA limit set | 1/5 | SYR4 | 2014–2019 |
| Dibromochloromethane | 0.6000 µg/L No EPA limit set | 1/9 | SYR4 | 2012–2019 |
| Lead | 0.6000 µg/L 4% of the EPA limit 15 µg/L | 1/14 | SYR4 | 2012–2018 |
| Trichloroacetic Acid | 0.5000 µg/L No EPA limit set | 1/5 | SYR4 | 2014–2019 |
61 contaminants tested, none detected
Frequently asked questions about Pinewood Acres
Is Pinewood Acres tap water safe to drink?
EPA monitoring detected 14 contaminants in Pinewood Acres's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Pinewood Acres's water?
EPA monitoring detected Fluoride, Copper, Chloroform, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Pinewood Acres serve?
Pinewood Acres reports serving 1,200 people, per its EPA record.
Has Pinewood Acres had any water quality violations?
The EPA has 22 violations on file for Pinewood Acres, of which 9 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.