Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2002-07-01 → 2002-07-25 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 44.92 µg/L 3.5% of the EPA limit 1300 µg/L
worst single sample: 102 µg/L | 33/33 | SYR4 | 2013–2019 |
| Nitrate | 5600 µg/L 56% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0060 mg/L 40% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Nitrate-Nitrite | 5600 µg/L 56% of the EPA limit 10000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.9925 µg/L No EPA limit set
worst single sample: 3.2 µg/L | 6/10 | SYR4 | 2012–2019 |
| Lead | 19.395 µg/L 129% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 21.9 µg/L | 4/33 | SYR4 | 2013–2019 |
| Bromodichloromethane | 3.543 µg/L No EPA limit set
worst single sample: 3.71 µg/L | 3/10 | SYR4 | 2012–2019 |
| Bromoform | 1.21 µg/L No EPA limit set
worst single sample: 1.22 µg/L | 2/10 | SYR4 | 2012–2019 |
| Chloroform | 5.14 µg/L No EPA limit set
worst single sample: 5.36 µg/L | 2/10 | SYR4 | 2012–2019 |
| TTHM | 13.135 µg/L 16% of the EPA limit 80 µg/L
worst single sample: 13.49 µg/L | 2/2 | SYR4 | 2016–2019 |
| Xylenes, Total | 0.5795 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 0.5800 µg/L | 2/10 | SYR4 | 2012–2019 |
| Barium | 34.5 µg/L 1.7% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2015 |
| Chromium | 0.7000 µg/L 0.7% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2015 |
| Combined Radium (-226 And -228) | 0.5410 pCi/L 11% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2016 |
| Dichloroacetic Acid | 1.858 µg/L No EPA limit set | 1/2 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 1.858 µg/L 3.1% of the EPA limit 60 µg/L | 1/2 | SYR4 | 2013–2019 |
60 contaminants tested, none detected
Frequently asked questions about Indian River Acres Pump District
Is Indian River Acres Pump District tap water safe to drink?
EPA monitoring detected 16 contaminants in Indian River Acres Pump District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Indian River Acres Pump District's water?
EPA monitoring detected Copper, Nitrate, Lead, Nitrate-Nitrite, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Indian River Acres Pump District serve?
Indian River Acres Pump District reports serving 300 people, per its EPA record.
Has Indian River Acres Pump District had any water quality violations?
The EPA has 1 violation on file for Indian River Acres Pump District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.