Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2006-10-01 → 2006-12-31 |
| MCL | Health-based | Resolved | 2006-10-01 → 2006-12-31 |
| MCL | Health-based | Resolved | 2006-10-01 → 2006-12-31 |
| MCL | Health-based | Resolved | 2006-10-01 → 2006-12-31 |
| MCL | Health-based | Resolved | 2006-07-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-07-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-07-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-07-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-01-01 → 2006-03-31 |
| MCL | Health-based | Resolved | 2006-01-01 → 2006-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 10.6 µg/L No EPA limit set
worst single sample: 11.5 µg/L | 131/131 | SYR4 | 2012–2019 |
| Chloroform | 79.55 µg/L No EPA limit set
worst single sample: 87.6 µg/L | 131/131 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 26.75 µg/L No EPA limit set
worst single sample: 28.4 µg/L | 131/131 | SYR4 | 2012–2019 |
| TTHM | 90.7 µg/L 113% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 99.8 µg/L | 131/131 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 60.3 µg/L 100% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 67.1 µg/L | 131/131 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 33.95 µg/L No EPA limit set
worst single sample: 39.7 µg/L | 131/131 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.1 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 118/131 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 2.115 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 118/131 | SYR4 | 2012–2019 |
| Copper | 218.5 µg/L 17% of the EPA limit 1300 µg/L
worst single sample: 840 µg/L | 42/42 | SYR4 | 2015–2018 |
| Lead | 11.8 µg/L 79% of the EPA limit 15 µg/L
worst single sample: 16 µg/L | 15/42 | SYR4 | 2015–2018 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2024 |
| Dibromoacetic Acid | 0.8700 µg/L No EPA limit set
worst single sample: 0.9000 µg/L | 4/131 | SYR4 | 2012–2019 |
32 contaminants tested, none detected
Utility contact
Frequently asked questions about Watertown Water & Sewer Authority
Is Watertown Water & Sewer Authority tap water safe to drink?
EPA monitoring detected 12 contaminants in Watertown Water & Sewer Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Watertown Water & Sewer Authority's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Watertown Water & Sewer Authority serve?
Watertown Water & Sewer Authority reports serving 9,972 people in Connecticut, per its EPA record.
Has Watertown Water & Sewer Authority had any water quality violations?
The EPA has 136 violations on file for Watertown Water & Sewer Authority, of which 40 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.