Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2020-04-01 |
| TT | Health-based | Resolved | 2020-04-01 |
| TT | Health-based | Resolved | 2020-04-01 |
| TT | Health-based | Resolved | 2020-04-01 |
| TT | Health-based | Resolved | 2020-02-01 |
| TT | Health-based | Resolved | 2020-02-01 |
| TT | Health-based | Resolved | 2020-02-01 |
| TT | Health-based | Resolved | 2020-02-01 |
| TT | Health-based | Resolved | 2019-12-01 |
| TT | Health-based | Resolved | 2019-12-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 25/25 | LCR | 2025 |
| Nitrate | 450 µg/L 4.5% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.77 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 4/10 | SYR4 | 2012–2019 |
| TTHM | 4.385 µg/L 5.5% of the EPA limit 80 µg/L
worst single sample: 4.4 µg/L | 4/11 | SYR4 | 2012–2019 |
| Barium | 199 µg/L 10% of the EPA limit 2000 µg/L
worst single sample: 200 µg/L | 3/3 | SYR4 | 2012–2017 |
| Bromodichloromethane | 1.38 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 3/10 | SYR4 | 2012–2019 |
| Chloroform | 0.8565 µg/L No EPA limit set
worst single sample: 0.8600 µg/L | 2/10 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.485 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 2/4 | SYR4 | 2015–2019 |
| Fluoride | 139.5 µg/L 3.5% of the EPA limit 4000 µg/L
worst single sample: 140 µg/L | 2/3 | SYR4 | 2013–2017 |
| Selenium | 0.8375 µg/L 1.7% of the EPA limit 50 µg/L
worst single sample: 0.8600 µg/L | 2/3 | SYR4 | 2012–2017 |
| Total Haloacetic Acids (HAA5) | 1.485 µg/L 2.5% of the EPA limit 60 µg/L
worst single sample: 1.5 µg/L | 2/7 | SYR4 | 2012–2019 |
| Bromoform | 0.5600 µg/L No EPA limit set | 1/10 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 0.2000 pCi/L 4% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2012 |
| Combined Uranium | 1.8 µg/L 6% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2014 |
| Gross Alpha, Excl. Radon And U | 1.7 pCi/L 11% of the EPA limit 15 pCi/L | 1/2 | SYR4 | 2012–2014 |
| Nitrate-Nitrite | 38 µg/L 0.4% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2012 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Tall Pines Village
Is Tall Pines Village tap water safe to drink?
EPA monitoring detected 16 contaminants in Tall Pines Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Tall Pines Village's water?
EPA monitoring detected Lead, Nitrate, Dibromochloromethane, TTHM, Barium, and others. The full list with the level and data source for each is above.
How many people does Tall Pines Village serve?
Tall Pines Village reports serving 60 people in Colorado, per its EPA record.
Has Tall Pines Village had any water quality violations?
The EPA has 288 violations on file for Tall Pines Village, of which 19 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.