Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2022-07-01 → 2022-12-31 |
| TT | Health-based | Resolved | 2022-07-01 → 2022-12-31 |
| TT | Health-based | Resolved | 2022-07-01 → 2022-12-31 |
| TT | Health-based | Resolved | 2022-07-01 → 2022-12-31 |
| TT | Health-based | Resolved | 2020-01-01 → 2020-06-30 |
| TT | Health-based | Resolved | 2020-01-01 → 2020-06-30 |
| TT | Health-based | Resolved | 2020-01-01 → 2020-06-30 |
| TT | Health-based | Resolved | 2020-01-01 → 2020-06-30 |
| MR | Monitoring | Resolved | 2024-06-01 → 2024-06-30 |
| MR | Monitoring | Resolved | 2024-06-01 → 2024-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 25.925 µg/L 43% of the EPA limit 60 µg/L
worst single sample: 37.5 µg/L | 256/256 | SYR4 | 2012–2019 |
| TTHM | 31.83 µg/L 40% of the EPA limit 80 µg/L
worst single sample: 43.2 µg/L | 255/256 | SYR4 | 2012–2019 |
| Lead | 0.0025 mg/L 17% of the EPA limit 0.0150 mg/L | 24/24 | LCR | 2024 |
| Bromodichloromethane | 5.92 µg/L No EPA limit set
worst single sample: 6.6 µg/L | 18/18 | SYR4 | 2012–2019 |
| Chloroform | 20.86 µg/L No EPA limit set
worst single sample: 21.2 µg/L | 18/18 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 12.9875 µg/L No EPA limit set
worst single sample: 13.85 µg/L | 16/16 | SYR4 | 2016–2019 |
| Trichloroacetic Acid | 7.8675 µg/L No EPA limit set
worst single sample: 8.04 µg/L | 16/16 | SYR4 | 2016–2019 |
| Fluoride | 935 µg/L 23% of the EPA limit 4000 µg/L
worst single sample: 970 µg/L | 15/15 | SYR4 | 2012–2019 |
| Barium | 20.3 µg/L 1% of the EPA limit 2000 µg/L
worst single sample: 21 µg/L | 8/8 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.895 µg/L No EPA limit set
worst single sample: 2 µg/L | 8/18 | SYR4 | 2012–2019 |
| Nitrate | 68 µg/L 0.7% of the EPA limit 10000 µg/L | 8/16 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 67.1 µg/L 0.7% of the EPA limit 10000 µg/L
worst single sample: 68 µg/L | 4/7 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 1.241 µg/L No EPA limit set
worst single sample: 1.26 µg/L | 3/16 | SYR4 | 2016–2019 |
| Selenium | 0.2500 µg/L 0.5% of the EPA limit 50 µg/L | 1/8 | SYR4 | 2012–2019 |
91 contaminants tested, none detected
Utility contact
Frequently asked questions about Broomfield City and County of
Is Broomfield City and County of tap water safe to drink?
EPA monitoring detected 14 contaminants in Broomfield City and County of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Broomfield City and County of's water?
EPA monitoring detected Total Haloacetic Acids (HAA5), TTHM, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Broomfield City and County of serve?
Broomfield City and County of reports serving 106,153 people in Colorado, per its EPA record.
Has Broomfield City and County of had any water quality violations?
The EPA has 12 violations on file for Broomfield City and County of, of which 8 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.