Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 14 µg/L No EPA limit set
worst single sample: 18 µg/L | 382/382 | SYR4 | 2012–2019 |
| Dibromochloromethane | 19.95 µg/L No EPA limit set
worst single sample: 26 µg/L | 382/382 | SYR4 | 2012–2019 |
| TTHM | 48 µg/L 60% of the EPA limit 80 µg/L
worst single sample: 65 µg/L | 381/381 | SYR4 | 2012–2019 |
| Bromoform | 12 µg/L No EPA limit set
worst single sample: 17 µg/L | 379/382 | SYR4 | 2012–2019 |
| Chloroform | 11 µg/L No EPA limit set
worst single sample: 22 µg/L | 374/382 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 14 µg/L 23% of the EPA limit 60 µg/L
worst single sample: 23.9 µg/L | 350/372 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 7.4 µg/L No EPA limit set
worst single sample: 17 µg/L | 344/372 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.9 µg/L No EPA limit set
worst single sample: 7.1 µg/L | 327/372 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 3.7 µg/L No EPA limit set
worst single sample: 5.8 µg/L | 298/372 | SYR4 | 2012–2019 |
| Fluoride | 790 µg/L 20% of the EPA limit 4000 µg/L
worst single sample: 820 µg/L | 109/109 | SYR4 | 2012–2019 |
| Nitrate | 499.58 µg/L 5% of the EPA limit 10000 µg/L
worst single sample: 500 µg/L | 24/82 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 23/23 | LCR | 2024 |
| Combined Uranium | 10.4196 µg/L 35% of the EPA limit 30 µg/L
worst single sample: 13.8123 µg/L | 19/20 | SYR4 | 2013–2018 |
| Arsenic | 3.125 µg/L 31% of the EPA limit 10 µg/L
worst single sample: 3.2 µg/L | 16/27 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 483000 µg/L 4830% of the EPA limit, at the 95th percentile of samples — 10000 µg/L
worst single sample: 510000 µg/L | 10/38 | SYR4 | 2012–2019 |
| Bromate | 8.87 µg/L 89% of the EPA limit 10 µg/L
worst single sample: 9.8 µg/L | 7/95 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.48 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 5/372 | SYR4 | 2012–2019 |
| Lithium | 26 µg/L No EPA limit set | 4/4 | UCMR-5 | 2024 |
| Barium | 120 µg/L 6% of the EPA limit 2000 µg/L | 3/27 | SYR4 | 2012–2019 |
| Mercury | 1.885 µg/L 94% of the EPA limit 2 µg/L
worst single sample: 1.9 µg/L | 2/26 | SYR4 | 2012–2019 |
93 contaminants tested, none detected
Utility contact
Frequently asked questions about Helix Water District
Is Helix Water District tap water safe to drink?
EPA monitoring detected 20 contaminants in Helix Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Helix Water District's water?
EPA monitoring detected Bromodichloromethane, Dibromochloromethane, TTHM, Bromoform, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Helix Water District serve?
Helix Water District reports serving 277,668 people in California, per its EPA record.
Has Helix Water District had any water quality violations?
The EPA has no formal drinking-water violations on file for Helix Water District.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.