Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-11-01 → 2015-11-30 |
| MCL | Health-based | Resolved | 2004-02-01 → 2004-02-29 |
| MCL | Health-based | Resolved | 2004-02-01 → 2004-02-29 |
| MCL | Health-based | Resolved | 1993-02-01 → 1993-02-28 |
| MCL | Health-based | Resolved | 1993-02-01 → 1993-02-28 |
| MR | Monitoring | Resolved | 1993-07-01 → 2000-03-01 |
| MR | Monitoring | Resolved | 1993-07-01 → 2000-03-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 12204 µg/L 122% of the EPA limit, at the 95th percentile of samples — 10000 µg/L
worst single sample: 18000 µg/L | 618/632 | SYR4 | 2012–2019 |
| 1,2-DIBROMO-3-CHLOROPROPANE | 0.2640 µg/L 132% of the EPA limit, at the 95th percentile of samples — 0.2000 µg/L
worst single sample: 0.4100 µg/L | 173/275 | SYR4 | 2012–2019 |
| Fluoride | 590 µg/L 15% of the EPA limit 4000 µg/L
worst single sample: 990 µg/L | 33/33 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 29/29 | LCR | 2025 |
| Combined Uranium | 9.4764 µg/L 32% of the EPA limit 30 µg/L
worst single sample: 10.728 µg/L | 13/14 | SYR4 | 2012–2013 |
| Nitrate-Nitrite | 579500 µg/L 5795% of the EPA limit, at the 95th percentile of samples — 10000 µg/L
worst single sample: 750000 µg/L | 12/15 | SYR4 | 2012–2019 |
| Chloroform | 5.04 µg/L No EPA limit set
worst single sample: 5.2 µg/L | 9/22 | SYR4 | 2013–2019 |
| TTHM | 6.7 µg/L 8.4% of the EPA limit 80 µg/L
worst single sample: 7.1 µg/L | 9/22 | SYR4 | 2013–2019 |
| Bromodichloromethane | 1.87 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 4/22 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.37 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 4/17 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 1.37 µg/L 2.3% of the EPA limit 60 µg/L
worst single sample: 1.4 µg/L | 4/17 | SYR4 | 2014–2019 |
| Arsenic | 4.94 µg/L 49% of the EPA limit 10 µg/L
worst single sample: 5.1 µg/L | 3/33 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1 µg/L No EPA limit set | 1/22 | SYR4 | 2013–2019 |
98 contaminants tested, none detected
Utility contact
Frequently asked questions about San Antonio Water Company
Is San Antonio Water Company tap water safe to drink?
EPA monitoring detected 13 contaminants in San Antonio Water Company's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in San Antonio Water Company's water?
EPA monitoring detected Nitrate, 1,2-DIBROMO-3-CHLOROPROPANE, Fluoride, Lead, Combined Uranium, and others. The full list with the level and data source for each is above.
How many people does San Antonio Water Company serve?
San Antonio Water Company reports serving 3,441 people in California, per its EPA record.
Has San Antonio Water Company had any water quality violations?
The EPA has 7 violations on file for San Antonio Water Company, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.