Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2002-02-01 → 2002-02-28 |
| MCL | Health-based | Resolved | 2002-02-01 → 2002-02-28 |
| MR | Monitoring | Resolved | 2004-01-01 → 2004-03-31 |
| MR | Monitoring | Resolved | 2004-01-01 → 2004-03-31 |
| MR | Monitoring | Resolved | 2002-12-01 → 2002-12-31 |
| MR | Monitoring | Resolved | 2002-12-01 → 2002-12-31 |
| Other | Monitoring | Archived | 1989-11-01 → 1989-11-30 |
| Other | Monitoring | Archived | 1989-01-01 → 1989-01-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Dibromochloromethane | 12 µg/L No EPA limit set | 59/61 | SYR4 | 2013–2019 |
| TTHM | 66.5 µg/L 83% of the EPA limit 80 µg/L
worst single sample: 91 µg/L | 59/59 | SYR4 | 2014–2019 |
| Bromodichloromethane | 21 µg/L No EPA limit set
worst single sample: 25 µg/L | 58/61 | SYR4 | 2013–2019 |
| Bromoform | 6.48 µg/L No EPA limit set
worst single sample: 11 µg/L | 53/61 | SYR4 | 2013–2019 |
| Chloroform | 32.8 µg/L No EPA limit set
worst single sample: 53 µg/L | 52/61 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 4.13 µg/L No EPA limit set
worst single sample: 5 µg/L | 39/59 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 40.35 µg/L 67% of the EPA limit 60 µg/L
worst single sample: 71 µg/L | 38/59 | SYR4 | 2014–2019 |
| Lead | 0.0012 mg/L 8% of the EPA limit 0.0150 mg/L | 31/31 | LCR | 2023 |
| Dichloroacetic Acid | 17 µg/L No EPA limit set
worst single sample: 23 µg/L | 21/59 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 3.33 µg/L No EPA limit set
worst single sample: 4.1 µg/L | 15/59 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 14.55 µg/L No EPA limit set
worst single sample: 23 µg/L | 14/59 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 32.4 µg/L No EPA limit set
worst single sample: 39 µg/L | 13/59 | SYR4 | 2014–2019 |
| Fluoride | 500 µg/L 13% of the EPA limit 4000 µg/L
worst single sample: 600 µg/L | 11/11 | SYR4 | 2013–2019 |
| Barium | 181 µg/L 9% of the EPA limit 2000 µg/L
worst single sample: 190 µg/L | 7/11 | SYR4 | 2013–2019 |
| Combined Uranium | 1.6837 µg/L 5.6% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2013 |
95 contaminants tested, none detected
Utility contact
Frequently asked questions about San Jacinto, City of
Is San Jacinto, City of tap water safe to drink?
EPA monitoring detected 15 contaminants in San Jacinto, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in San Jacinto, City of's water?
EPA monitoring detected Dibromochloromethane, TTHM, Bromodichloromethane, Bromoform, Chloroform, and others. The full list with the level and data source for each is above.
How many people does San Jacinto, City of serve?
San Jacinto, City of reports serving 18,950 people in California, per its EPA record.
Has San Jacinto, City of had any water quality violations?
The EPA has 8 violations on file for San Jacinto, City of, of which 2 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.