Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2024-10-17 |
| MCL | Health-based | Resolved | 2013-04-01 → 2013-06-30 |
| MCL | Health-based | Resolved | 2013-04-01 → 2013-06-30 |
| MCL | Health-based | Resolved | 2003-12-01 → 2004-01-31 |
| MCL | Health-based | Resolved | 2003-12-01 → 2004-01-31 |
| MCL | Health-based | Resolved | 2003-12-01 → 2004-01-31 |
| MCL | Health-based | Resolved | 2003-12-01 → 2004-01-31 |
| MCL | Health-based | Resolved | 2003-12-01 → 2004-01-31 |
| RPT | Monitoring | Unaddressed | 2024-10-17 |
| MR | Monitoring | Resolved | 2008-01-01 → 2014-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 580 µg/L 5.8% of the EPA limit 10000 µg/L | 6/14 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2020 |
| Arsenic | 7.565 µg/L 76% of the EPA limit 10 µg/L
worst single sample: 7.7 µg/L | 4/4 | SYR4 | 2015–2019 |
| Bromodichloromethane | 4.09 µg/L No EPA limit set
worst single sample: 4.1 µg/L | 2/2 | SYR4 | 2019 |
| Bromoform | 3.39 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 2/2 | SYR4 | 2019 |
| Chloroform | 2.6 µg/L No EPA limit set | 2/2 | SYR4 | 2019 |
| Dibromoacetic Acid | 2.25 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 2/2 | SYR4 | 2019 |
| Dibromochloromethane | 5.38 µg/L No EPA limit set
worst single sample: 5.4 µg/L | 2/2 | SYR4 | 2019 |
| Dichloroacetic Acid | 2.155 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 2/2 | SYR4 | 2019 |
| Fluoride | 1085 µg/L 27% of the EPA limit 4000 µg/L
worst single sample: 1100 µg/L | 2/2 | SYR4 | 2015–2019 |
| TTHM | 15.28 µg/L 19% of the EPA limit 80 µg/L
worst single sample: 15.3 µg/L | 2/2 | SYR4 | 2019 |
| Total Haloacetic Acids (HAA5) | 4.405 µg/L 7.3% of the EPA limit 60 µg/L
worst single sample: 4.5 µg/L | 2/2 | SYR4 | 2019 |
| Nitrate-Nitrite | 530 µg/L 5.3% of the EPA limit 10000 µg/L | 1/2 | SYR4 | 2015–2019 |
38 contaminants tested, none detected
Utility contact
Frequently asked questions about Glen Ivy Hot Springs
Is Glen Ivy Hot Springs tap water safe to drink?
EPA monitoring detected 13 contaminants in Glen Ivy Hot Springs's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Glen Ivy Hot Springs's water?
EPA monitoring detected Nitrate, Lead, Arsenic, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Glen Ivy Hot Springs serve?
Glen Ivy Hot Springs reports serving 1,087 people in California, per its EPA record.
Has Glen Ivy Hot Springs had any water quality violations?
The EPA has 49 violations on file for Glen Ivy Hot Springs, of which 8 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.