Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 9800 µg/L 98% of the EPA limit 10000 µg/L
worst single sample: 11000 µg/L | 1382/1388 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 35/35 | LCR | 2023 |
| Bromodichloromethane | 15.775 µg/L No EPA limit set
worst single sample: 27.3 µg/L | 32/32 | SYR4 | 2013–2017 |
| Bromoform | 25.685 µg/L No EPA limit set
worst single sample: 30.6 µg/L | 32/32 | SYR4 | 2013–2017 |
| Dibromochloromethane | 27.41 µg/L No EPA limit set
worst single sample: 45.9 µg/L | 32/32 | SYR4 | 2013–2017 |
| TTHM | 69.37 µg/L 87% of the EPA limit 80 µg/L
worst single sample: 115 µg/L | 32/32 | SYR4 | 2013–2017 |
| Total Haloacetic Acids (HAA5) | 14.89 µg/L 25% of the EPA limit 60 µg/L
worst single sample: 24.7 µg/L | 32/32 | SYR4 | 2013–2017 |
| Chloroform | 9 µg/L No EPA limit set
worst single sample: 11.3 µg/L | 26/32 | SYR4 | 2013–2017 |
| Dibromoacetic Acid | 11.1 µg/L No EPA limit set
worst single sample: 15.1 µg/L | 26/26 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 5.1675 µg/L No EPA limit set
worst single sample: 5.76 µg/L | 16/26 | SYR4 | 2014–2017 |
| Barium | 194.6 µg/L 9.7% of the EPA limit 2000 µg/L
worst single sample: 196 µg/L | 8/8 | SYR4 | 2013–2019 |
| Fluoride | 301.3 µg/L 7.5% of the EPA limit 4000 µg/L
worst single sample: 302 µg/L | 8/8 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 1.8725 µg/L No EPA limit set
worst single sample: 1.96 µg/L | 6/26 | SYR4 | 2014–2017 |
| Nitrate-Nitrite | 10475 µg/L 105% of the EPA limit, at the 95th percentile of samples — 10000 µg/L
worst single sample: 11000 µg/L | 6/6 | SYR4 | 2019 |
| Arsenic | 6.221 µg/L 62% of the EPA limit 10 µg/L
worst single sample: 6.65 µg/L | 3/8 | SYR4 | 2013–2019 |
| Chromium | 13.6 µg/L 14% of the EPA limit 100 µg/L | 1/8 | SYR4 | 2013–2019 |
| Selenium | 12.1 µg/L 24% of the EPA limit 50 µg/L | 1/8 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 1.81 µg/L No EPA limit set | 1/26 | SYR4 | 2014–2017 |
65 contaminants tested, none detected
Utility contact
Frequently asked questions about Los Angeles Cwwd 37-acton
Is Los Angeles Cwwd 37-acton tap water safe to drink?
EPA monitoring detected 18 contaminants in Los Angeles Cwwd 37-acton's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Los Angeles Cwwd 37-acton's water?
EPA monitoring detected Nitrate, Lead, Bromodichloromethane, Bromoform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Los Angeles Cwwd 37-acton serve?
Los Angeles Cwwd 37-acton reports serving 4,805 people in California, per its EPA record.
Has Los Angeles Cwwd 37-acton had any water quality violations?
The EPA has no formal drinking-water violations on file for Los Angeles Cwwd 37-acton.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.