Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0052 mg/L 35% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2024 |
| Chloroform | 11.3555 µg/L No EPA limit set
worst single sample: 11.45 µg/L | 8/8 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 5.565 µg/L No EPA limit set
worst single sample: 5.6 µg/L | 8/8 | SYR4 | 2013–2019 |
| TTHM | 17.591 µg/L 22% of the EPA limit 80 µg/L
worst single sample: 17.92 µg/L | 8/8 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 12.035 µg/L 20% of the EPA limit 60 µg/L
worst single sample: 12.7 µg/L | 8/8 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 5.625 µg/L No EPA limit set
worst single sample: 5.8 µg/L | 8/8 | SYR4 | 2013–2019 |
| Bromodichloromethane | 4.242 µg/L No EPA limit set
worst single sample: 4.29 µg/L | 7/8 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.5925 µg/L No EPA limit set
worst single sample: 2.83 µg/L | 6/8 | SYR4 | 2013–2019 |
| Barium | 155 µg/L 7.8% of the EPA limit 2000 µg/L
worst single sample: 160 µg/L | 3/12 | SYR4 | 2012–2019 |
| Fluoride | 129.5 µg/L 3.2% of the EPA limit 4000 µg/L
worst single sample: 130 µg/L | 2/12 | SYR4 | 2012–2019 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 1/12 | SYR4 | 2012–2019 |
| Copper | 130 µg/L 10% of the EPA limit 1300 µg/L | 1/12 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.5 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
90 contaminants tested, none detected
Utility contact
Frequently asked questions about Kelseyville Co Waterworks District 3
Is Kelseyville Co Waterworks District 3 tap water safe to drink?
EPA monitoring detected 13 contaminants in Kelseyville Co Waterworks District 3's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Kelseyville Co Waterworks District 3's water?
EPA monitoring detected Lead, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Kelseyville Co Waterworks District 3 serve?
Kelseyville Co Waterworks District 3 reports serving 4,102 people in California, per its EPA record.
Has Kelseyville Co Waterworks District 3 had any water quality violations?
The EPA has no formal drinking-water violations on file for Kelseyville Co Waterworks District 3.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.