Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2025-01-01 → 2025-12-31 |
| MR | Monitoring | Archived | 2025-01-01 → 2025-12-31 |
| MON | Monitoring | Resolved | 2021-03-01 → 2021-03-31 |
| MON | Monitoring | Resolved | 2021-03-01 → 2021-03-31 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2015-06-01 |
| MR | Monitoring | Resolved | 2015-06-01 |
| MR | Monitoring | Resolved | 1993-07-01 → 2003-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0041 mg/L 27% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2025 |
| Bromoform | 19.585 µg/L No EPA limit set
worst single sample: 21.3 µg/L | 8/13 | SYR4 | 2014–2019 |
| Dibromochloromethane | 13.685 µg/L No EPA limit set
worst single sample: 16.1 µg/L | 8/13 | SYR4 | 2014–2019 |
| TTHM | 36.78 µg/L 46% of the EPA limit 80 µg/L
worst single sample: 39.3 µg/L | 8/13 | SYR4 | 2014–2019 |
| Bromodichloromethane | 7.77 µg/L No EPA limit set
worst single sample: 9.9 µg/L | 7/13 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 8.725 µg/L No EPA limit set
worst single sample: 8.9 µg/L | 6/12 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 4.35 µg/L No EPA limit set
worst single sample: 4.9 µg/L | 6/12 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 11.625 µg/L 19% of the EPA limit 60 µg/L
worst single sample: 11.7 µg/L | 6/12 | SYR4 | 2014–2019 |
| Chloroform | 5.155 µg/L No EPA limit set
worst single sample: 5.8 µg/L | 4/13 | SYR4 | 2014–2019 |
| Fluoride | 1690 µg/L 42% of the EPA limit 4000 µg/L
worst single sample: 1700 µg/L | 3/3 | SYR4 | 2014–2017 |
| Combined Uranium | 4.768 µg/L 16% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2015 |
| Monobromoacetic Acid | 1 µg/L No EPA limit set | 1/12 | SYR4 | 2014–2019 |
| Toluene | 0.6000 µg/L 0.1% of the EPA limit 1000 µg/L | 1/3 | SYR4 | 2013–2019 |
68 contaminants tested, none detected
Utility contact
Frequently asked questions about Nps - Death Valley, Stovepipe Wells
Is Nps - Death Valley, Stovepipe Wells tap water safe to drink?
EPA monitoring detected 13 contaminants in Nps - Death Valley, Stovepipe Wells's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Nps - Death Valley, Stovepipe Wells's water?
EPA monitoring detected Lead, Bromoform, Dibromochloromethane, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Nps - Death Valley, Stovepipe Wells serve?
Nps - Death Valley, Stovepipe Wells reports serving 175 people in California, per its EPA record.
Has Nps - Death Valley, Stovepipe Wells had any water quality violations?
The EPA has 9 violations on file for Nps - Death Valley, Stovepipe Wells, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.