Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Archived | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Archived | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Archived | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2020-10-01 → 2020-12-31 |
| MCL | Health-based | Resolved | 2020-10-01 → 2020-12-31 |
| MCL | Health-based | Resolved | 2020-10-01 → 2020-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 44.86 µg/L 75% of the EPA limit 60 µg/L
worst single sample: 50.4 µg/L | 42/42 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 20.5 µg/L No EPA limit set
worst single sample: 31 µg/L | 41/42 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 20.3 µg/L No EPA limit set
worst single sample: 23.7 µg/L | 41/42 | SYR4 | 2014–2019 |
| Bromodichloromethane | 10.12 µg/L No EPA limit set
worst single sample: 10.5 µg/L | 40/40 | SYR4 | 2014–2019 |
| Chloroform | 100.175 µg/L No EPA limit set
worst single sample: 116 µg/L | 40/40 | SYR4 | 2014–2019 |
| TTHM | 111.65 µg/L 140% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 125 µg/L | 40/40 | SYR4 | 2014–2019 |
| Dibromochloromethane | 2.035 µg/L No EPA limit set
worst single sample: 2.7 µg/L | 20/40 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 3.64 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 9/42 | SYR4 | 2014–2019 |
| Lead | 0.0140 mg/L 93% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2003 |
| Lead | 120 µg/L 800% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 149 µg/L | 5/30 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 1.1 µg/L No EPA limit set | 1/42 | SYR4 | 2014–2019 |
3 contaminants tested, none detected
Utility contact
Frequently asked questions about Belleville Water
Is Belleville Water tap water safe to drink?
EPA monitoring detected 11 contaminants in Belleville Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Belleville Water's water?
EPA monitoring detected Total Haloacetic Acids (HAA5), Dichloroacetic Acid, Trichloroacetic Acid, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Belleville Water serve?
Belleville Water reports serving 1,103 people in Arkansas, per its EPA record.
Has Belleville Water had any water quality violations?
The EPA has 85 violations on file for Belleville Water, of which 49 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.