Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2004-11-01 → 2004-11-30 |
| MCL | Health-based | Resolved | 2004-11-01 → 2004-11-30 |
| MCL | Health-based | Resolved | 2004-11-01 → 2004-11-30 |
| Other | Monitoring | Unaddressed | 2025-07-01 |
| MR | Monitoring | Resolved | 2016-12-01 |
| MR | Monitoring | Resolved | 2016-12-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1122 µg/L 28% of the EPA limit 4000 µg/L
worst single sample: 1280 µg/L | 99/102 | SYR4 | 2012–2019 |
| Dibromochloromethane | 7.95955 µg/L No EPA limit set
worst single sample: 10.7 µg/L | 22/22 | SYR4 | 2013–2019 |
| Bromodichloromethane | 7.02 µg/L No EPA limit set
worst single sample: 7.3 µg/L | 15/15 | SYR4 | 2013–2019 |
| Chloroform | 7.85 µg/L No EPA limit set
worst single sample: 9.8 µg/L | 14/15 | SYR4 | 2013–2019 |
| Copper | 283 µg/L 22% of the EPA limit 1300 µg/L
worst single sample: 310 µg/L | 10/20 | SYR4 | 2014–2017 |
| TTHM | 20.765 µg/L 26% of the EPA limit 80 µg/L
worst single sample: 20.8 µg/L | 8/8 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.55 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 7/8 | SYR4 | 2013–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2002 |
| Total Haloacetic Acids (HAA5) | 6.74 µg/L 11% of the EPA limit 60 µg/L
worst single sample: 6.8 µg/L | 7/8 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.55 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 6/8 | SYR4 | 2013–2019 |
| Bromoform | 2.418 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 5/15 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 3.225 µg/L No EPA limit set
worst single sample: 3.3 µg/L | 4/8 | SYR4 | 2013–2019 |
| Lead | 32.3 µg/L 215% of the EPA limit, at the 95th percentile of samples — 15 µg/L | 1/30 | SYR4 | 2013–2017 |
94 contaminants tested, none detected
Utility contact
Frequently asked questions about Mc Crory Waterworks
Is Mc Crory Waterworks tap water safe to drink?
EPA monitoring detected 13 contaminants in Mc Crory Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mc Crory Waterworks's water?
EPA monitoring detected Fluoride, Dibromochloromethane, Bromodichloromethane, Chloroform, Copper, and others. The full list with the level and data source for each is above.
How many people does Mc Crory Waterworks serve?
Mc Crory Waterworks reports serving 1,736 people in Arkansas, per its EPA record.
Has Mc Crory Waterworks had any water quality violations?
The EPA has 6 violations on file for Mc Crory Waterworks, of which 3 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.