Tap WaterIndex

← Arkansas

Tap water quality report

Searcy Waterworks

EPA monitoring tested this supplier for 108 contaminants and detected 17. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

108
contaminants tested
17
detected
28,196
people served
6
health-based violations
Arkansas rankingsLead in ArkansasPFAS in Arkansas
Water source
Surface water
Ownership
Local government
Counties served
White

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

6
health-based violations
11
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2008-08-01 → 2008-08-31
MCL Health-based Resolved 2008-08-01 → 2008-08-31
MCL Health-based Resolved 2008-08-01 → 2008-08-31
TT Health-based Archived 1994-11-01 → 1994-11-30
TT Health-based Archived 1994-11-01 → 1994-11-30
TT Health-based Archived 1994-11-01 → 1994-11-30
MR Monitoring Resolved 2012-10-01 → 2012-10-31
MR Monitoring Resolved 2012-10-01 → 2012-10-31
MR Monitoring Resolved 2012-10-01 → 2012-10-31
MR Monitoring Archived 1994-07-01 → 1994-07-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
9.63 µg/L
No EPA limit set
worst single sample: 13 µg/L
128/128 SYR4 2012–2019
Chloroform
57.83 µg/L
No EPA limit set
worst single sample: 82 µg/L
128/128 SYR4 2012–2019
TTHM
70.005 µg/L 88%
of the EPA limit 80 µg/L
worst single sample: 93.4 µg/L
120/120 SYR4 2012–2019
Dichloroacetic Acid
18.725 µg/L
No EPA limit set
worst single sample: 27 µg/L
116/116 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
35.625 µg/L 59%
of the EPA limit 60 µg/L
worst single sample: 46.7 µg/L
116/116 SYR4 2012–2019
Trichloroacetic Acid
16.7 µg/L
No EPA limit set
worst single sample: 21.2 µg/L
113/116 SYR4 2012–2019
Fluoride
930 µg/L 23%
of the EPA limit 4000 µg/L
worst single sample: 1160 µg/L
104/104 SYR4 2012–2019
Chlorite
721.6 µg/L 72%
of the EPA limit 1000 µg/L
worst single sample: 771 µg/L
92/96 SYR4 2012–2019
Dibromochloromethane
2.5 µg/L
No EPA limit set
worst single sample: 3.7 µg/L
78/134 SYR4 2012–2019
Monochloroacetic Acid
4.4 µg/L
No EPA limit set
worst single sample: 6.3 µg/L
23/116 SYR4 2012–2019
Nitrate-Nitrite
420 µg/L 4.2%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Copper
91.795 µg/L 7.1%
of the EPA limit 1300 µg/L
worst single sample: 128 µg/L
14/62 SYR4 2014–2017
Lead
0.0010 mg/L 6.7%
of the EPA limit 0.0150 mg/L
 14/14 LCR 2025
Lead
22.84 µg/L 152%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 23.4 µg/L
9/70 SYR4 2012–2019
Monobromoacetic Acid
2.86 µg/L
No EPA limit set
worst single sample: 3.1 µg/L
7/116 SYR4 2012–2019
Dibromoacetic Acid
1.18 µg/L
No EPA limit set
worst single sample: 1.2 µg/L
5/116 SYR4 2012–2019
Di(2-ethylhexyl) Phthalate
1.866 µg/L 31%
of the EPA limit 6 µg/L
worst single sample: 1.88 µg/L
2/18 SYR4 2012–2019
91 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateGross Beta Particle ActivityHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
BOGGS, SCOTT
Phone
501-268-2481
Email
[email protected]

Frequently asked questions about Searcy Waterworks

Is Searcy Waterworks tap water safe to drink?

EPA monitoring detected 17 contaminants in Searcy Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Searcy Waterworks's water?

EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Searcy Waterworks serve?

Searcy Waterworks reports serving 28,196 people in Arkansas, per its EPA record.

Has Searcy Waterworks had any water quality violations?

The EPA has 11 violations on file for Searcy Waterworks, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.