Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2008-08-01 → 2008-08-31 |
| MCL | Health-based | Resolved | 2008-08-01 → 2008-08-31 |
| MCL | Health-based | Resolved | 2008-08-01 → 2008-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Dichloroacetic Acid | 29.475 µg/L No EPA limit set
worst single sample: 33.5 µg/L | 226/226 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 48.775 µg/L 81% of the EPA limit 60 µg/L
worst single sample: 55.4 µg/L | 226/226 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 17.68 µg/L No EPA limit set
worst single sample: 20.8 µg/L | 225/226 | SYR4 | 2012–2019 |
| Bromodichloromethane | 10.72 µg/L No EPA limit set
worst single sample: 12.1 µg/L | 217/217 | SYR4 | 2012–2019 |
| Chloroform | 69.26 µg/L No EPA limit set
worst single sample: 89.4 µg/L | 217/217 | SYR4 | 2012–2019 |
| TTHM | 79.4 µg/L 99% of the EPA limit 80 µg/L
worst single sample: 99.9 µg/L | 217/217 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.98 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 185/217 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 6.105 µg/L No EPA limit set
worst single sample: 6.5 µg/L | 100/226 | SYR4 | 2012–2019 |
| Copper | 59.47 µg/L 4.6% of the EPA limit 1300 µg/L
worst single sample: 100 µg/L | 15/90 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.4 µg/L No EPA limit set | 15/226 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Lead | 26.2 µg/L 175% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 39 µg/L | 9/90 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 1.89 µg/L No EPA limit set
worst single sample: 2.1 µg/L | 7/226 | SYR4 | 2012–2019 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Springdale Water Utilities
Is Springdale Water Utilities tap water safe to drink?
EPA monitoring detected 13 contaminants in Springdale Water Utilities's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Springdale Water Utilities's water?
EPA monitoring detected Dichloroacetic Acid, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Springdale Water Utilities serve?
Springdale Water Utilities reports serving 98,948 people in Arkansas, per its EPA record.
Has Springdale Water Utilities had any water quality violations?
The EPA has 3 violations on file for Springdale Water Utilities, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.