Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2016-04-01 → 2016-06-30 |
| MCL | Health-based | Resolved | 2016-04-01 → 2016-06-30 |
| MCL | Health-based | Resolved | 2016-04-01 → 2016-06-30 |
| MCL | Health-based | Resolved | 2016-04-01 → 2016-06-30 |
| MCL | Health-based | Resolved | 2016-04-01 → 2016-06-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-07-31 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-07-31 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-07-31 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-07-31 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-07-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Dichloroacetic Acid | 31.395 µg/L No EPA limit set
worst single sample: 41.8 µg/L | 48/48 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 79.49 µg/L 132% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 94.3 µg/L | 48/48 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 40.88 µg/L No EPA limit set
worst single sample: 66.8 µg/L | 47/48 | SYR4 | 2013–2019 |
| Bromodichloromethane | 9.48 µg/L No EPA limit set
worst single sample: 10.3 µg/L | 45/45 | SYR4 | 2013–2019 |
| Chloroform | 101.6 µg/L No EPA limit set
worst single sample: 117 µg/L | 45/45 | SYR4 | 2013–2019 |
| TTHM | 108.8 µg/L 136% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 124 µg/L | 45/45 | SYR4 | 2013–2019 |
| Copper | 240 µg/L 18% of the EPA limit 1300 µg/L
worst single sample: 519 µg/L | 31/60 | SYR4 | 2012–2018 |
| Dibromochloromethane | 2.1 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 21/45 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 3.99 µg/L No EPA limit set
worst single sample: 4.2 µg/L | 15/48 | SYR4 | 2013–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Lead | 4.7 µg/L 31% of the EPA limit 15 µg/L
worst single sample: 6 µg/L | 14/60 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 1.28 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 3/48 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.195 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 2/48 | SYR4 | 2013–2019 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Lincoln Waterworks
Is Lincoln Waterworks tap water safe to drink?
EPA monitoring detected 13 contaminants in Lincoln Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lincoln Waterworks's water?
EPA monitoring detected Dichloroacetic Acid, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Lincoln Waterworks serve?
Lincoln Waterworks reports serving 6,690 people in Arkansas, per its EPA record.
Has Lincoln Waterworks had any water quality violations?
The EPA has 52 violations on file for Lincoln Waterworks, of which 22 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.