Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2013-01-01 → 2013-01-31 |
| TT | Health-based | Resolved | 2013-01-01 → 2013-01-31 |
| TT | Health-based | Resolved | 2013-01-01 → 2013-01-31 |
| TT | Health-based | Resolved | 2013-01-01 → 2013-01-31 |
| TT | Health-based | Resolved | 2013-01-01 → 2013-01-31 |
| TT | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| TT | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| TT | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| TT | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
| TT | Health-based | Resolved | 2011-11-01 → 2011-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 960 µg/L 24% of the EPA limit 4000 µg/L
worst single sample: 1040 µg/L | 104/104 | SYR4 | 2012–2019 |
| Copper | 331.5 µg/L 26% of the EPA limit 1300 µg/L
worst single sample: 417 µg/L | 40/60 | SYR4 | 2013–2019 |
| Bromodichloromethane | 6.125 µg/L No EPA limit set
worst single sample: 6.4 µg/L | 26/26 | SYR4 | 2012–2019 |
| Chloroform | 36.175 µg/L No EPA limit set
worst single sample: 38 µg/L | 26/26 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 11.3 µg/L No EPA limit set | 19/19 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 21.93 µg/L 37% of the EPA limit 60 µg/L
worst single sample: 22.2 µg/L | 19/19 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 10.92 µg/L No EPA limit set
worst single sample: 11.1 µg/L | 19/19 | SYR4 | 2012–2019 |
| TTHM | 42.32 µg/L 53% of the EPA limit 80 µg/L
worst single sample: 43 µg/L | 18/18 | SYR4 | 2012–2019 |
| Lead | 0.0040 mg/L 27% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Nitrate-Nitrite | 400 µg/L 4% of the EPA limit 10000 µg/L | 12/16 | SYR4 | 2012–2019 |
| Lead | 18 µg/L 120% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 20 µg/L | 11/68 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.13525 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 6/31 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 2.34 µg/L 39% of the EPA limit 6 µg/L | 1/13 | SYR4 | 2012–2019 |
94 contaminants tested, none detected
Utility contact
Frequently asked questions about Clinton Waterworks
Is Clinton Waterworks tap water safe to drink?
EPA monitoring detected 13 contaminants in Clinton Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Clinton Waterworks's water?
EPA monitoring detected Fluoride, Copper, Bromodichloromethane, Chloroform, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Clinton Waterworks serve?
Clinton Waterworks reports serving 10,280 people in Arkansas, per its EPA record.
Has Clinton Waterworks had any water quality violations?
The EPA has 53 violations on file for Clinton Waterworks, of which 46 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.