Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2000-09-01 → 2000-09-30 |
| MCL | Health-based | Resolved | 2000-09-01 → 2000-09-30 |
| MCL | Health-based | Resolved | 2000-09-01 → 2000-09-30 |
| MON | Monitoring | Resolved | 2018-03-01 → 2018-03-31 |
| RPT | Monitoring | Resolved | 2018-03-01 |
| MON | Monitoring | Resolved | 2018-03-01 → 2018-03-31 |
| MON | Monitoring | Resolved | 2017-11-01 → 2017-11-30 |
| MON | Monitoring | Resolved | 2017-11-01 → 2017-11-30 |
| MON | Monitoring | Resolved | 2017-11-01 → 2017-11-30 |
| RPT | Monitoring | Resolved | 2016-06-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 12.545 µg/L No EPA limit set
worst single sample: 15.3 µg/L | 20/20 | SYR4 | 2012–2019 |
| Chloroform | 19.755 µg/L No EPA limit set
worst single sample: 36 µg/L | 20/20 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 7.315 µg/L No EPA limit set
worst single sample: 13.3 µg/L | 20/20 | SYR4 | 2012–2019 |
| TTHM | 46.89 µg/L 59% of the EPA limit 80 µg/L
worst single sample: 48.6 µg/L | 20/20 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 14.785 µg/L 25% of the EPA limit 60 µg/L
worst single sample: 22.1 µg/L | 20/20 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 4.1 µg/L No EPA limit set
worst single sample: 6.8 µg/L | 19/20 | SYR4 | 2012–2019 |
| Dibromochloromethane | 9.475 µg/L No EPA limit set
worst single sample: 11.1 µg/L | 14/20 | SYR4 | 2012–2019 |
| Copper | 44.06 µg/L 3.4% of the EPA limit 1300 µg/L
worst single sample: 50 µg/L | 13/30 | SYR4 | 2013–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2004 |
| Dibromoacetic Acid | 2.825 µg/L No EPA limit set
worst single sample: 3 µg/L | 6/20 | SYR4 | 2012–2019 |
| Lead | 5.25 µg/L 35% of the EPA limit 15 µg/L
worst single sample: 6 µg/L | 4/30 | SYR4 | 2013–2019 |
| Bromoform | 2.285 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 2/20 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 2.285 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 2/20 | SYR4 | 2012–2019 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Hartman Waterworks
Is Hartman Waterworks tap water safe to drink?
EPA monitoring detected 13 contaminants in Hartman Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hartman Waterworks's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Hartman Waterworks serve?
Hartman Waterworks reports serving 947 people in Arkansas, per its EPA record.
Has Hartman Waterworks had any water quality violations?
The EPA has 23 violations on file for Hartman Waterworks, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.