Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1993-06-01 → 1993-06-30 |
| MCL | Health-based | Archived | 1993-06-01 → 1993-06-30 |
| Other | Monitoring | Archived | 1993-06-01 → 1993-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 10.445 µg/L No EPA limit set
worst single sample: 12.3 µg/L | 132/134 | SYR4 | 2012–2019 |
| Chloroform | 70.25 µg/L No EPA limit set
worst single sample: 88.5 µg/L | 132/134 | SYR4 | 2012–2019 |
| TTHM | 83.135 µg/L 104% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 101 µg/L | 124/126 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.2 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 123/140 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 24.2 µg/L No EPA limit set
worst single sample: 32.3 µg/L | 123/124 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 48.61 µg/L 81% of the EPA limit 60 µg/L
worst single sample: 62.3 µg/L | 123/124 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 24 µg/L No EPA limit set
worst single sample: 27.7 µg/L | 123/124 | SYR4 | 2012–2019 |
| Fluoride | 1087 µg/L 27% of the EPA limit 4000 µg/L
worst single sample: 1210 µg/L | 103/103 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.265 µg/L No EPA limit set
worst single sample: 3.5 µg/L | 28/124 | SYR4 | 2012–2019 |
| Copper | 123 µg/L 9.5% of the EPA limit 1300 µg/L
worst single sample: 377 µg/L | 25/90 | SYR4 | 2013–2019 |
| Lead | 10.75 µg/L 72% of the EPA limit 15 µg/L
worst single sample: 26 µg/L | 22/101 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1095 µg/L 11% of the EPA limit 10000 µg/L
worst single sample: 5730 µg/L | 19/19 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 4.04 µg/L No EPA limit set
worst single sample: 7.4 µg/L | 17/124 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Nitrate | 400 µg/L 4% of the EPA limit 10000 µg/L | 12/12 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.59 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 2/124 | SYR4 | 2012–2019 |
93 contaminants tested, none detected
Utility contact
Frequently asked questions about Batesville Water Utilities
Is Batesville Water Utilities tap water safe to drink?
EPA monitoring detected 16 contaminants in Batesville Water Utilities's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Batesville Water Utilities's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Batesville Water Utilities serve?
Batesville Water Utilities reports serving 15,621 people in Arkansas, per its EPA record.
Has Batesville Water Utilities had any water quality violations?
The EPA has 3 violations on file for Batesville Water Utilities, of which 2 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.