Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Addressed | 2025-12-01 |
| TT | Health-based | Addressed | 2025-12-01 |
| TT | Health-based | Addressed | 2025-12-01 |
| TT | Health-based | Addressed | 2025-11-01 |
| TT | Health-based | Addressed | 2025-11-01 |
| TT | Health-based | Addressed | 2025-11-01 |
| TT | Health-based | Addressed | 2025-10-01 |
| TT | Health-based | Addressed | 2025-10-01 |
| TT | Health-based | Addressed | 2025-10-01 |
| TT | Health-based | Addressed | 2025-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 982 µg/L 25% of the EPA limit 4000 µg/L
worst single sample: 1270 µg/L | 257/260 | SYR4 | 2012–2019 |
| Chloroform | 8.21 µg/L No EPA limit set
worst single sample: 10.4 µg/L | 74/83 | SYR4 | 2012–2019 |
| Bromodichloromethane | 2.3 µg/L No EPA limit set
worst single sample: 2.69 µg/L | 61/83 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 5.125 µg/L No EPA limit set
worst single sample: 31.3 µg/L | 46/48 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 7.775 µg/L 13% of the EPA limit 60 µg/L
worst single sample: 59.3 µg/L | 46/48 | SYR4 | 2012–2019 |
| TTHM | 10.64 µg/L 13% of the EPA limit 80 µg/L
worst single sample: 12.1 µg/L | 45/46 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 3.385 µg/L No EPA limit set
worst single sample: 20.6 µg/L | 44/48 | SYR4 | 2012–2019 |
| Copper | 498 µg/L 38% of the EPA limit 1300 µg/L
worst single sample: 544 µg/L | 35/60 | SYR4 | 2014–2017 |
| Dibromochloromethane | 0.5456 µg/L No EPA limit set
worst single sample: 0.8460 µg/L | 29/107 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2025 |
| Lead | 18.28 µg/L 122% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 25 µg/L | 7/73 | SYR4 | 2012–2018 |
| Dichloromethane | 3.546 µg/L 71% of the EPA limit 5 µg/L
worst single sample: 3.78 µg/L | 4/37 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.79 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 2/48 | SYR4 | 2012–2019 |
| Lithium | 12.8 µg/L No EPA limit set | 2/2 | UCMR-5 | 2025 |
| Di(2-ethylhexyl) Phthalate | 1.95 µg/L 33% of the EPA limit 6 µg/L | 1/36 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 5.8 µg/L No EPA limit set | 1/48 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1390 µg/L 14% of the EPA limit 10000 µg/L | 1/31 | SYR4 | 2012–2019 |
92 contaminants tested, none detected
Utility contact
Frequently asked questions about Marion Waterworks
Is Marion Waterworks tap water safe to drink?
EPA monitoring detected 17 contaminants in Marion Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Marion Waterworks's water?
EPA monitoring detected Fluoride, Chloroform, Bromodichloromethane, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Marion Waterworks serve?
Marion Waterworks reports serving 13,032 people in Arkansas, per its EPA record.
Has Marion Waterworks had any water quality violations?
The EPA has 52 violations on file for Marion Waterworks, of which 37 are health-based (a contaminant limit or required treatment was breached) and 25 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.