Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Archived | 1994-09-01 → 1994-09-30 |
| MR | Monitoring | Resolved | 2004-09-01 → 2004-09-30 |
| MR | Monitoring | Resolved | 2004-09-01 → 2004-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 900 µg/L 23% of the EPA limit 4000 µg/L
worst single sample: 980 µg/L | 85/86 | SYR4 | 2012–2019 |
| Copper | 754.6 µg/L 58% of the EPA limit 1300 µg/L
worst single sample: 886 µg/L | 55/60 | SYR4 | 2013–2019 |
| Lead | 2.36 µg/L 16% of the EPA limit 15 µg/L
worst single sample: 6 µg/L | 29/63 | SYR4 | 2012–2019 |
| Dibromochloromethane | 14.6 µg/L No EPA limit set | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Bromodichloromethane | 7.74 µg/L No EPA limit set
worst single sample: 8.4 µg/L | 12/12 | SYR4 | 2012–2019 |
| Bromoform | 6.545 µg/L No EPA limit set
worst single sample: 6.6 µg/L | 12/12 | SYR4 | 2012–2019 |
| Chloroform | 2.925 µg/L No EPA limit set
worst single sample: 3.2 µg/L | 12/12 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 4.24 µg/L No EPA limit set
worst single sample: 4.4 µg/L | 9/9 | SYR4 | 2012–2019 |
| TTHM | 30.32 µg/L 38% of the EPA limit 80 µg/L
worst single sample: 32.2 µg/L | 9/9 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 7.8 µg/L 13% of the EPA limit 60 µg/L
worst single sample: 8.2 µg/L | 9/9 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 1.94 µg/L No EPA limit set
worst single sample: 2 µg/L | 7/9 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.355 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 4/9 | SYR4 | 2012–2019 |
| Chromium | 1.6 µg/L 1.6% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 1 µg/L No EPA limit set | 1/9 | SYR4 | 2012–2019 |
| Lithium | 10.8 µg/L No EPA limit set | 1/2 | UCMR-5 | 2023 |
91 contaminants tested, none detected
Utility contact
Frequently asked questions about Warren Waterworks
Is Warren Waterworks tap water safe to drink?
EPA monitoring detected 16 contaminants in Warren Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Warren Waterworks's water?
EPA monitoring detected Fluoride, Copper, Lead, Dibromochloromethane, Lead, and others. The full list with the level and data source for each is above.
How many people does Warren Waterworks serve?
Warren Waterworks reports serving 6,001 people in Arkansas, per its EPA record.
Has Warren Waterworks had any water quality violations?
The EPA has 3 violations on file for Warren Waterworks, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.