Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Dichloroacetic Acid | 28.22 µg/L No EPA limit set
worst single sample: 33.9 µg/L | 140/140 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 55.415 µg/L 92% of the EPA limit 60 µg/L
worst single sample: 81.5 µg/L | 140/140 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 29.74 µg/L No EPA limit set
worst single sample: 52.3 µg/L | 140/140 | SYR4 | 2012–2019 |
| Bromodichloromethane | 11.525 µg/L No EPA limit set
worst single sample: 12.6 µg/L | 136/136 | SYR4 | 2012–2019 |
| Chloroform | 90.275 µg/L No EPA limit set
worst single sample: 124 µg/L | 136/136 | SYR4 | 2012–2019 |
| TTHM | 100.5 µg/L 126% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 132 µg/L | 136/136 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.13 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 78/136 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.725 µg/L No EPA limit set
worst single sample: 5 µg/L | 36/140 | SYR4 | 2012–2019 |
| Copper | 45.4 µg/L 3.5% of the EPA limit 1300 µg/L
worst single sample: 51 µg/L | 15/60 | SYR4 | 2014–2017 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Lead | 17.5 µg/L 117% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 19 µg/L | 7/60 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 2.33 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 7/140 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.2 µg/L No EPA limit set | 2/140 | SYR4 | 2012–2019 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Bella Vista Poa
Is Bella Vista Poa tap water safe to drink?
EPA monitoring detected 13 contaminants in Bella Vista Poa's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bella Vista Poa's water?
EPA monitoring detected Dichloroacetic Acid, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Bella Vista Poa serve?
Bella Vista Poa reports serving 39,419 people in Arkansas, per its EPA record.
Has Bella Vista Poa had any water quality violations?
The EPA has 45 violations on file for Bella Vista Poa, of which 26 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.